PDA
















Meaurement of stem and handlebar

View Full Version : Meaurement of stem and handlebar




4wu
  
Does anybody know how to measure stem length and handlebar size? e.g. When it says the reach/drop of a handlebar is 85/145 mm, from which point to which point to do I get these measurements?
I'm thinking to change the both stem/handlebar to fit my size.

Appreciate your response.:)

wooliferkins
  
It depends on the manufacturer most are centre to centre, go to manufacturer websites and check the tech pages there are drawings showing dimensions on most sites. What bars/stem did you have in mind?Does anybody know how to measure stem length and handlebar size? e.g. When it says the reach/drop of a handlebar is 85/145 mm, from which point to which point to do I get these measurements?
I'm thinking to change the both stem/handlebar to fit my size.

Appreciate your response.:)

PeterF
  
Does anybody know how to measure stem length and handlebar size? e.g. When it says the reach/drop of a handlebar is 85/145 mm, from which point to which point to do I get these measurements?
I'm thinking to change the both stem/handlebar to fit my size.

Appreciate your response.:)
This link shows a nice description (scroll down a bit).

http://www.excelsports.com/new.asp?page=8&description=Millenium+OS+Handlebar&vendorCode=ITM&major=1&minor=15

Automatic Translations (Powered by Powered by Google):
BulgarianCroatianCzechDanishDutchEnglishFinnishFrenchGermanItalianJapaneseKoreanNorwegianPolishPortugueseSpanishSwedish
Thanks to vBET 3.2.2 enjoy automatic translations