Replacement screws etc

[bigmark99]

Many of the screws/bolts etc have got quite rusty on my bike?
Its a kona

any idea where I can get replacement ones for them.....?

[kdelong]

At your freindly LBS (Local Bike Shop)!

[gclark8]

I get stainless steel from my local nut and bolt shop, A&M Bolts and Nuts, Bassendean. ;)

[531Aussie]

most bolts on bikes have a very 'standard' thread pitch, and are easily replaced. For example, the thread on the bottle cag bolts is same pitch used on a few other bits on the bike. I've used bottle cage bolts on derailleurs, derailleur clamps, stem face-plates, and even once or twice on brake cable clamps

[Tech72]

All of the above suggestions are good. Another source for specific screws and small bits for your bike and components is "Loose Screws - Small Bicycle Parts" online store, see link. Look in the "fasteners" section.

http://www.loosescrews.com/

[artemidorus]

Just grease them, with or without removing them. What's wrong with a little rust?