Go Back   Cycling Forums » Bikes » Cycling Equipment
Cycling Equipment Need some advice on cycling equipment? Do you have a buckled wheel? Problems with your gears? Need help truing a wheel?













tri fit

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1  
Old 01-04.-2007
WKB WKB is offline
Registered User
 
Join Date: Nov 2006
Posts: 30
Rep Power: 0
WKB is on a distinguished road
Default tri fit

I'm grateful for all those who replied to my previous question about 650 v 700 wheels on a triathlon bike. I thought the thread was informative, even if there is not a universal agreement. That brings me to my next question, which has to do with fitting on a tri bike. I ride a size 54 road bike, but have been told by a lot of triathletes that this translates to approximately a size 52 tri bike. My local bike shop, which does not stock tri bikes, says rather emphatically this is not true. They acknowledge that a lot of triathletes try to squeeze on to smaller bikes, presumably to save some weight.
What's the opinion about fitting on tri bikes? Should I knock off two sizes from my road bike and use that to fit the tri or should I use the same size as my road bike?

Thanks in advance, WKB.
Reply With Quote
  #2  
Old 01-04.-2007
triguy98's Avatar
Registered User
 
Join Date: Sep 2004
Location: Tampa, FL
Posts: 317
Rep Power: 6
triguy98 is on a distinguished road
Default Re: tri fit

Usually knock off at least one size for a tri bike. It is NOT for weight savings, but rather for obtaining proper body geometry angles. You want your arms at 90 degrees to your torso and torso as close to parallel to your top tube as possible, as well as allowing your legs to extend no more than 150 at the bottom of your stroke.

http://www.slowtwitch.com/mainheadin...r/bikefit.html
__________________
'05 GF Cake DLX SRAM X-9, 'Zocchi MX Comp, Avid BB7
Trek Equinox 7: 105, all stock, all fast
'99 GT XCR5000: LX/XT, Avid SDs, Judy XC
------------------------------------------------------
Life is short, ride hard. BONZAI!!!!
Reply With Quote


  #3  
Old 01-04.-2007
Registered User
 
Join Date: Apr 2004
Location: Perth (Basso), West Australia
Age: 59
Posts: 3,516
Rep Power: 9
gclark8
Default Re: tri fit

Good advice.

See also: http://www.trysport.com.au/services.htm
__________________
Cheers,
George.
Reply With Quote


  #4  
Old 01-05.-2007
Registered User
 
Join Date: Jul 2006
Location: Naples Fl
Age: 54
Posts: 14
Rep Power: 0
ROCYC is on a distinguished road
Default Re: tri fit

I was recentley measured and fitted for a new tri bike, and it was a size smaller than the two road bikes I had and they were all the same make of bike. I would make sure you get fitted properley for the new bike.
Reply With Quote


  #5  
Old 01-05.-2007
padawan's Avatar
Registered User
 
Join Date: Dec 2005
Location: T.O.
Posts: 237
Rep Power: 4
padawan is on a distinguished road
Default Re: tri fit

Quote:
Originally Posted by triguy98
Usually knock off at least one size for a tri bike. It is NOT for weight savings, but rather for obtaining proper body geometry angles. You want your arms at 90 degrees to your torso and torso as close to parallel to your top tube as possible, as well as allowing your legs to extend no more than 150 at the bottom of your stroke.

http://www.slowtwitch.com/mainheadin...r/bikefit.html
+1

And realize that one 54 cm tri bike is not the same as another 54 cm tri bike. It depends a lot on how the company measures the bike. The standard c-t-c measuring protocol isn't as relevant for a tri bike. What is important is that you can achieve the proper body angles comfortably on the bike. I know 2 people that have been measured for a tri bike and it wasn't until they had a proper fit done on the bike that they realized they needed a different size (body proportions were slightly unusual i.e. longer torso & arms/shorter legs).
Reply With Quote


Reply

Bookmarks

Tags
fit, tri

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 02:25 PM.

Powered by: vBulletin Copyright © 2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.3.0
Copyright © 2001 - 2009 cyclingforums.com

Translations (powered by Google):
Bulgarian Croatian Czech Danish Dutch English Finnish French German Italian Japanese Korean Norwegian Polish Portuguese Spanish Swedish