| Cycling Equipment Need some advice on cycling equipment? Do you have a buckled wheel? Problems with your gears? Need help truing a wheel? |
| | |
![]() |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
| |||
| |||
Purchased the above in October last year. Enjoying it a lot now that I have figured out the different acceleration from my mountain bike. Just wondering if anyone else had any feedback on it.Also I am considering geting some clips. I have tried them on a mates bike and found them a bit difficult to get used to so would appreciate any suggestions of easy to use ones. Cheers |
|
#2
| |||
| |||
Quote:
|
|
#3
| |||
| |||
Definitely invest in some good shoes and clipless pedals. There are many threads on which is best, but there really is no right answer. A lot of the answer depends on how and where you ride and whether you have any problems with your knees. Speedplay are nice becuase you can clip in from either side and they allow a lot of float (twisting of the heel) without popping out. This feature is especially valuable for riders with knee problems. The downside is that they do not tolerate dirt. I had a friend spend 20 minutes cleaning his pedals and cleats before he could resume a ride after a break. The Look (and Shimano SPD-SL) style are popular because they have a broad surface area. They only work on one side, though, and although they are not fouled by dirt as easily as the Speedplay, It is recommended that you cover the clips when you are walking to keep from wearing the cleats down. The Shimano SPD mountain bike pedals have the advantage of not being fouled by dirt and being double sided. Some road bike purists knock them because they are "mountain bike pedals", but there is nothing to prevent them from being used on road bikes. They do not weigh any more than road bike pedals, but the bolt position on the cleats is different from road bike cleats, and many road shoes will not work. I use the SPD pedals (http://www.performancebike.com/shop/...egory_ID=10045) on my road bike because I do mostly event rides where I get off and walk around every 15 to 20 miles. The mountain bike shoes are easier to walk in and the SPD pedals work well even if the cleats are dirty. My son-in-law, however, replaced his SPD pedals with Look pedals because he found the "target" too small and was not able to master the art of cliping in without looking on his SPD pedals. I never had that problem. Everyone falls once. It is part of the process. I practiced getting in and out with the bike on the trainer. I was convinced that I had the art of getting out mastered when I went on my first road ride. About five miles into the ride, we had to stop at a red light that was at the bottom of a hill and on a slight turn. I had unclipped my right leg before coming to a stop, but because of the turn, my bike started leaning to the left. I could not get my left foot out before I made contact with the rider next to me. Once that happened, we both went down. By the next ride, though, getting in and out was second nature. I never think about it anymore, and I would never ride without clipless pedals again. |
|
#4
| ||||
| ||||
Crank Bros' offering would be of interest too. Compatiblity of cleats across their MTB and road range is a plus. After my bad experience with Shimano M540 SPD pedals (bearing failure within 2 months and poor warranty repair), I am thinking maybe Crank Bros is the way to go.
__________________ Morphed Bianchi Camaleonte IV 2006, Ridley Damocles 2006, Garmin, Mac |
|
#5
| |||
| |||
Quote:
I was told that it was the original specialized tri bike prototype- and if you check the geometry its almost a duplicate of the tarmac. I used it in a couple TT's last summer with some clip-ons - it was sweet. But its a bike you can comfortably ride all day [IMO] [brother]mark |
![]() |
| Bookmarks |
| Tags |
| allez, specialized, sport, triple |
« 8sp campag cogs on 10sp spline - have you done this?
|
How do I convert Trek 7300FX hybrid to mtn bike? »
| Thread Tools | Search this Thread |
| Display Modes | |
| |
All times are GMT -4. The time now is 01:56 AM.
Powered by: vBulletin Copyright © 2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.3.0
Copyright © 2001 - 2009 cyclingforums.com
Powered by: vBulletin Copyright © 2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.3.0
Copyright © 2001 - 2009 cyclingforums.com













Linear Mode

















