| Cycling Equipment Need some advice on cycling equipment? Do you have a buckled wheel? Problems with your gears? Need help truing a wheel? |
| |
![]() |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
| |||
| |||
I'm replacing these lovely items but note that the Al chainrings seem to have the least wear at 8k miles compared with the steel cassette and chain with maybe 4k miles. The chain shows about 12.25", the most used gears on the cassette are visibly distressed, and boy, has my riding become more careful. Would this differential wear be a function of diameter? YMMV but any rules of thumb for changing out of these components? Cheers from Fairbanks |
|
#2
| |||
| |||
8000 miles sounds like a lot, although I know a guy who logs 10k a year and he doesnt replace his whole drivetrain. But he does replace his chain a couple of times a year. Which brings us to the question: are your chainrings still good? if the chain is stretched 1/4"? then I would bet the chainrings are overdue as well. Good pics of worn chainrings can be seen via Google Images... keywords: worn chainrings all's'miles curby |
|
#3
| |||
| |||
Have also found the chainrings don't wear very fast, even though they are aluminum. Believe this is because the high number of teeth share the load. Also, they can be quite worn and not cause any skipping or other problems. But that doesn't mean they should be left on forever, until they look like shark's teeth. On my bike, I replaced the FSA triple chainrings @ 18K miles. The teeth didn't look bad, but on the middle 39 ring I noticed more "play" than I wanted when pressing on a pedal with the bike static. Also, could see some daylight between the chain and ring when pulling the chain away from the ring at the 3 o'clock position, meaning the chain was tight under load only on the first few teeth on top. Figured that was causing some added drivetrain loss. The replacement rings had an added bonus of making the drivetrain quieter and smoother, like when new. We all ride in different conditions, but I get ~5K miles on chains (based on the Parktool gauge 0.75% wear), and replace the cassette when replacing the second chain, @ 10K miles. (I tried putting a third replacement chain on the worn cassette the first time and it skipped badly). |
![]() |
| Bookmarks |
| Tags |
| cassette, chain, chainring, wear |
« cassette mix & match question
|
Brainstorming session: How To improve the Easton Attack aerobar elbow pads »
| Thread Tools | Search this Thread |
| Display Modes | |
| |
All times are GMT -4. The time now is 09:46 AM.
Powered by: vBulletin Copyright © 2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.3.0
Copyright © 2001 - 2009 cyclingforums.com
Powered by: vBulletin Copyright © 2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.3.0
Copyright © 2001 - 2009 cyclingforums.com













Linear Mode

















