Go Back   Cycling Forums » Bikes » Cycling Equipment
Cycling Equipment Need some advice on cycling equipment? Do you have a buckled wheel? Problems with your gears? Need help truing a wheel?













storing steel bike in humidity

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1  
Old 12-05.-2003
Junior Member
 
Join Date: Jun 2003
Posts: 7
Rep Power: 0
SamMan23
Default storing steel bike in humidity

I have a steel lemond frame. I was moving to another place where I might have to store my bike in an outdoor room. It would be protected from direct rain, but I was wondering how the frame and components would do in the humidity.
Reply With Quote
  #2  
Old 12-05.-2003
Junior Member
 
Join Date: Aug 2003
Posts: 1
Rep Power: 0
Paul41
Default Re: storing steel bike in humidity

Quote:
Originally posted by SamMan23
I have a steel lemond frame. I was moving to another place where I might have to store my bike in an outdoor room. It would be protected from direct rain, but I was wondering how the frame and components would do in the humidity.
I keep my bike (it is also steel) in my garage and live where it is humid and have never had any problems.
Reply With Quote
  #3  
Old 12-06.-2003
Just a rider
 
Join Date: Mar 2003
Location: So Cal
Posts: 186
Rep Power: 0
shokhead1
Default Re: storing steel bike in humidity

Quote:
Originally posted by SamMan23
I have a steel lemond frame. I was moving to another place where I might have to store my bike in an outdoor room. It would be protected from direct rain, but I was wondering how the frame and components would do in the humidity.
Good coat of wax and frame saver.
Reply With Quote
  #4  
Old 12-06.-2003
Cipher's Avatar
Registered User
 
Join Date: Sep 2002
Location: Minnesota, U.S.A.
Posts: 778
Rep Power: 8
Cipher
Default Frame Saver

For those that are not familiar with the stuff, (Frame Saver) take a look here.

http://www.schwabcycles.com/cgi/wc.d...og~DETAIL~1697
__________________
"The only thing in this world that gives orders, is balls"
~ Ski-U-Ma! ~
"Know your limits... Then FK'N Crush'em!!!"
Reply With Quote
  #5  
Old 12-06.-2003
Registered User
 
Join Date: Jul 2003
Posts: 5
Rep Power: 0
waterford
Default

I also use Bike Wash (a Finish Line product) regularly. It is said to help prevent surface rust. Also, dirt seems to attract moisture. If you have ever seen the very thin walls on 853 tubing like LeMond uses, you will appreciate how important rust prevent is.
Reply With Quote
  #6  
Old 12-06.-2003
Registered User
 
Join Date: Jul 2003
Posts: 5
Rep Power: 0
waterford
Default

I neglected to add that you should lube your derailers and brake points regularly (I use Boeshield T-14) and spray your chain, cogs and chainrings with t-14 or another good corrosion preventer. I didn't and my chain never worked as well after a winter's storage and my front derailer was frozen. Basically, I store my best bikes in the winter and ride an older bike when the weather is poor.
Reply With Quote
  #7  
Old 12-10.-2003
BaCardi's Avatar
Senior Member
 
Join Date: Jul 2003
Location: south
Posts: 638
Rep Power: 0
BaCardi is an unknown quantity at this point
Default

Some framebuilders use linseed oil. Its cheap and available at Home Depot in the paint section. A gallon costs next to nothing. Boil some in a pot and pour it into each tube. Make sure all the inner tubes are coated especially the rust prone chainstays. Turn the bike upside down, sideways, righside up, and every which way to get the linseed oil to drain out. Let it sit outside for a few hours to dry. Remember to wipe off the excess. Presto! Rust protection that will last for years!
Reply With Quote
  #8  
Old 12-10.-2003
Registered User
 
Join Date: Oct 2003
Location: Melbourne, Australia
Posts: 141
Rep Power: 7
armchair_spacem
Default Re: storing steel bike in humidity

Quote:
Originally posted by SamMan23
I have a steel lemond frame. I was moving to another place where I might have to store my bike in an outdoor room. It would be protected from direct rain, but I was wondering how the frame and components would do in the humidity.
I live in a coastal area where steel frames are vulnerable to salt and moisture - many of us here use fish oil in our steel frames - forms a persistent, penetrating rust preventive coating and it's dirt cheap - about $3 aussie for a big spray can. Spray into your tubes and roll the bike around every which way to distribute it evenly, then allow the frame to drain. Best applied in winter because your frame will reek for a week or two, worse in summer heat (though it does smell kind of like the ocean).
Reply With Quote
  #9  
Old 12-10.-2003
Registered User
 
Join Date: Oct 2003
Posts: 5,151
Rep Power: 12
boudreaux is on a distinguished road
Default

Quote:
Originally posted by BaCardi
Some framebuilders use linseed oil. Its cheap and available at Home Depot in the paint section. Boil some in a pot and pour it into each tube.
Save time and energy.Buy BOILED linseed oil.
Reply With Quote
Reply

Bookmarks

Tags
bike, humidity, steel, storing

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 07:38 AM.

Powered by: vBulletin Copyright © 2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.3.0
Copyright © 2001 - 2009 cyclingforums.com

Translations (powered by Google):
Bulgarian Croatian Czech Danish Dutch English Finnish French German Italian Japanese Korean Norwegian Polish Portuguese Spanish Swedish