Does Anyone Know Where I Can Get A Full Bicycle Blueprint Drawing?

[Neoinventor]

I'm looking for a full shop drawing for a bicycle - of course what they would
give the welding and / or machine shop to build a bicycle from scratch.
I checked the I.H.P.V. website and they only have outline drawings.
I do a lot of work with human powered vehicles and I can't believe - err, yes I
do believe I do have - that this is a difficult entity to find.
I'm thinking of inventing / designing a new high capacity bicycle trailer - as
far as I know there are none capable of pulling 150 pounds or so - am I
correct??

Thanks In Advance,
Rob McCarthy
Hicksville, New York
[email protected]

 

[Mark]

Neoinventor wrote:
> I'm looking for a full shop drawing for a bicycle - of course what they would
> give the welding and / or machine shop to build a bicycle from scratch.
> I checked the I.H.P.V. website and they only have outline drawings.
> I do a lot of work with human powered vehicles and I can't believe - err, yes I
> do believe I do have - that this is a difficult entity to find.
> I'm thinking of inventing / designing a new high capacity bicycle trailer - as
> far as I know there are none capable of pulling 150 pounds or so - am I
> correct??
>
> Thanks In Advance,
> Rob McCarthy
> Hicksville, New York
> [email protected]

I don't know of any drawings, however this compnay builds and selle
hi-capacity trailers.My friend has one and they are great...

http://www.bikesatwork.com/bike-trailers/

Regards,
Mark

 

[Huw]

Neoinventor wrote:
> I'm looking for a full shop drawing for a bicycle - of course what
> they would give the welding and / or machine shop to build a bicycle
> from scratch.

You could try posting in alt.cad.autocad, comp.cad.microstation, or in the non-usenet groups at

news:\\discussion.autodesk.com
news:\\news.viecon.com

Someone there might have a generic drawing they'd be willing and able to pass on. You'd probably have to download the huge BentleyView to view it, unless you have AutoCAD or Microstation.

 

[Neoinventor]

Thanks For the Leads Guys; I followed them all up!
Thanks Again!