M
Matt O'Toole
Guest
Is there a kit to convert my Ultegra triple braze-on front derailer to a
clamp-on? It has to fit a fat Klein seat tube.
Matt O.
clamp-on? It has to fit a fat Klein seat tube.
Matt O.
Go to a bike shop and order the correct diameter clamp-on kit.
Or if you must order on line, wrap a piece of paper around the seat tube. Mark with a pencil to determine the circumfrence. Divide this by 3.1415927 to determine the diameter. Order accordingly.
http://www.competitivecyclist.com/z...TANDARD&PRODUCT.ID=1193&CATEGORY.ID=318&MODE=
Or if you must order on line, wrap a piece of paper around the seat tube. Mark with a pencil to determine the circumfrence. Divide this by 3.1415927 to determine the diameter. Order accordingly.
http://www.competitivecyclist.com/z...TANDARD&PRODUCT.ID=1193&CATEGORY.ID=318&MODE=
M
Matt O'Toole
Guest
Weisse Luft wrote:
> Go to a bike shop and order the correct diameter clamp-on kit.
>
> Or if you must order on line, wrap a piece of paper around the seat
> tube. Mark with a pencil to determine the circumfrence. Divide this
> by 3.1415927 to determine the diameter. Order accordingly.
>
> http://tinyurl.com/6y5jt
Thanks Weisse! I just found and ordered one from Performance, along with some
other little things I needed.
Matt O.
> Go to a bike shop and order the correct diameter clamp-on kit.
>
> Or if you must order on line, wrap a piece of paper around the seat
> tube. Mark with a pencil to determine the circumfrence. Divide this
> by 3.1415927 to determine the diameter. Order accordingly.
>
> http://tinyurl.com/6y5jt
Thanks Weisse! I just found and ordered one from Performance, along with some
other little things I needed.
Matt O.
Similar threads
