Cycling and bicycle racing discussion forums.   View New Forum Topics
Today's Forum Topics

Set as homepage


Go Back   Cycling Forums > Tech Corner > Cycling Training
User Name
Password
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read


Welcome to CyclingForums.com

You are currently viewing our website as a guest which gives you limited access to view most discussions. You will have to register before you can post to this thread.

By joining our free online community you will have access to post new topics, communicate privately with other cyclingforums.com members (PM), respond to polls, upload photos and access other special features like product reviews and classifieds.


Rain Riding?

Reply
 
Thread Tools Search this Thread Display Modes
Old 11-02.-2003, 12:33 AM   #1
JamesO
Junior Member
 
Join Date: Feb 2003
Posts: 8
Arrow Rain Riding?

What are your hints to riding in the rain?


Do you use different tires?
Do you have a routine after the ride to ensure that rust isn't a problem? Specifically how do you ensure that it won't rust?

I pretty much have the keeping-the-cold-out problem covered (pun intended), but do you have any advice for proper maintainence specifically pertaining to post rain riding, and riding in the rain itself.


Any advice would be much appreciated.


Cheers,
James
JamesO is offline  
Reply With Quote
Old 11-02.-2003, 04:39 AM   #2
benne
Junior Member
 
benne's Avatar
 
Join Date: Feb 2003
Location: Belgium
Posts: 6
Default

Don't worry about riding in the rain. I have always used the same tires, same bike (obviously), nothing special besides some rain-proof clothing.

You also don't have to worry about rust if you just clean your bike afterwards (or at least rinse the sand off).

The only part that could actually show some rust if you don't look after it, is the chain.
__________________
"Life moves pretty fast. If you don't stop and look around once in a while, you could miss it." - Ferris Bueler
benne is offline  
Reply With Quote
Old 11-02.-2003, 07:07 PM   #3
2LAP
Moderator
 
2LAP's Avatar
 
Join Date: Feb 2002
Location: UK
Posts: 1,265
Default

Don't forget to make yourself visable, look after yourself when you get home and take a drink with you when you are out. Its very easy to get dehydrated when you wear lots of clothes due to rain or cold.

I often let 10-20psi out of my tyres to increse traction.
2LAP is offline  
Reply With Quote
Old 15-02.-2003, 06:15 AM   #4
ant evans
Member
 
ant evans's Avatar
 
Join Date: Jan 2003
Location: Cardiff, Wales
Posts: 95
Default

The only tyres I've had 'problems' (broken wrist) with in the wet were treaded commuter tyres. The only time Michelin has let me down.

Make sure you aren't getting water in your bottom bracket (that's the bike's bottom bracket ;-) and headset. Most road bikes have poor (no) drainage in the bb, so take the seat tube out, turn it upside down, and see what comes out. A bb that's always wet will eventually get stuck in there and you'll have to throw the frame away.

A section of MTB inner tube cut into a fat H can be tied around the seat clamp to keep water out at the back.

Same story with the headset... water can persist for ages in there. It will destroy headset bearings in one season, and steel steerers will rust. You can tie a tube around the bottom bearing race in the same way, but although it keeps grit out, it helps retain water.

Neoprene is rubbish. So are wax and dry lubricants. Get the most expensive synthetic chain lube you can find, and clean the thing regularly with diesel. After a wet ride, the chain will rust. Oil or diesel it quick. Change the chain often (1000 miles) if it's used in nasty conditions.

You can also get water persisting in the wheels. A white Alu oxide deposit inside is the giveaway. There's not much you can do about it.

Hubs seem to be more water-resistant (more grease), but then I'm using MTB hubs. The exception is the chain-side rear one. There is no incentive for water to escape, and if the seals are no good (anything below XT or Ultegra), your axle grease turns to bubbles.

If you ride off the road and can fit mud guards (fenders), you can really prolong the life of the drivetrain by fitting a front mud flap. I kid you not.

Accept that you will wear out rims. Grit collects on the inside surface, and then flows onto the braking surfaces when you go through standing water. This grinds your pads and rims down about 10 times faster than normal. Get lots of brake pads, and check for thin rims by overinflating every now and again.

Store the bike in a dry place. Get a hygrometer.

Hope this helps. I live in Wales, I know what I'm talking about.
__________________
drivers = smokers
ant evans is offline  
Reply With Quote

Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT +10. The time now is 09:50 PM.


Powered by: vBulletin Copyright © 2000 - 2008, Jelsoft Enterprises Ltd.
Copyright © 2001 - 2006 cyclingforums.com

Links to websites we like:
Pezcyclingnews | Cyclingnews.com | Wine Zone | iinet