Today's Forum Topics
Set as homepage
|
View
New Forum Topics Today's Forum Topics Set as homepage |
 |
|
|||||||
Welcome to CyclingForums.com You are currently viewing our website as a guest which gives you limited access to view most discussions. You will have to register before you can post to this thread. By joining our free online community you will have access to post new topics, communicate privately with other cyclingforums.com members (PM), respond to polls, upload photos and access other special features like product reviews and classifieds. |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
17-11.-2004, 06:31 PM
|
#1 |
|
Registered User
Join Date: Nov 2004
Posts: 16
|
disc brake problem
I recently bought a bike with shimano deore xt disc brakes. The problem is there is a real drag on the back wheel which doesn't spin freely. This is the first time i've owned a bike with disk brakes, and have been told this drag is normal while the pads burn in. Is this true, or do i need to adjust them. if I need to adjust them how do i do that ..
|
|
|
|
17-11.-2004, 06:34 PM
|
#2 | |
|
Registered User
Join Date: Mar 2004
Posts: 1
|
Re: disc brake problem
Quote:
they shouldnt drag - you probably just need to adjust the cable and maybe the position of the caliper mounting bolts- go to the Shimano site and download the service instructions- it should be on there |
|
|
|
|
|
17-11.-2004, 06:41 PM
|
#3 | |
|
Registered User
Join Date: Nov 2004
Posts: 16
|
Re: disc brake problem
Quote:
cheers will look at shimano sight now |
|
|
|
|
|
27-11.-2004, 01:24 AM
|
#4 |
|
Registered User
Join Date: Jun 2004
Location: London
Posts: 28
|
Re: disc brake problem
i recently got Hope Mono Mini's the back on tends to take longer to bed in than the front, just wait, it'll go away eventually, just look at the pads, if the disc is central to the pads it shld b fine
|
|
|
|
|
29-11.-2004, 05:01 PM
|
#5 |
|
Registered User
Join Date: Nov 2004
Posts: 31
|
Re: disc brake problem
WHAT! NO FREE WHEEL MOTION? if u buy a new car with disc breaks the last thing you want is for the mo'fo' to drag! and even worse for some one to tell you that its ok and it will go away in time! bullshit! gettum' serviced or they might lock or grind your pad prematurely. its new it should work primo
 |
|
|
|
|
29-11.-2004, 06:52 PM
|
#6 | |
|
Registered User
Join Date: Nov 2004
Posts: 16
|
Re: disc brake problem
Quote:
thanks for the advice(s). I think the solution is to get it serviced the problems not going away |
|
|
|
|
|
29-11.-2004, 08:02 PM
|
#7 |
|
Registered User
Join Date: Nov 2004
Posts: 31
|
Re: disc brake problem
by the way try not to think of the brand as the lemon, like with any make or brand u get the occasional slip in the craftsmanship or a bump during shipping. although some people immediately switch brands, u can do so if it makes u feel better but chances are that if u take it to a good mechanic that does'nt seem to be in a rush or get another set the problem will be rectified. i have deore all around hubs, cassette, cranks, chain, derailers, discs; everything on a surly instigator with rs psylo f/ shock and i would totally reccommend the disc breaks and i'm 6'2" 285 lbs. which requires ALOT of stopping power. having discs means u probably have a nice bike and nice bikes should handle and feel nicely.
 good luck. |
|
|
|
|
30-11.-2004, 07:13 AM
|
#8 |
|
Registered User
Join Date: Nov 2004
Location: Near Durham
Posts: 8
|
Re: disc brake problem
Disc brakes are adjusted by adding or removin very thin spacers between the frame and the caliper, look at the brake and you should clearly see that one pad is closer - adjust as needed.
If your a disc virgin you should be aware of a few things; 1. the fluid inside your XT could be hazardess to your self and will remove any paint it touches, so be carefull! This is a DOT fluid and has to be used in servicing. 2. You must clean the calliper, pads and disc with proper disc cleaner or fresh water, any cotamination will render the brake useless and new pads would be needed. 3. You have an open system which means are is alowed to enter the lever resivour, you may notice a small hole? If you allow the bike to be upside down for any period of time the air will travel into the hoses and towards the caliper, which will make the lever feel mushy and loose power, the system would probably need bleeding. They will take time to bed in and the back will take longer than the front - when you brake try to make it last as long as possible to create more friction! Enjoy!
__________________
http://www.budgetbikes.co.uk Please visit my site, any feedback is much apreciated as long as its constructive!!! |
|
|
|
Linear Mode
