Today's Forum Topics
Set as homepage
|
View
New Forum Topics Today's Forum Topics Set as homepage |
 |
|
|||||||
Welcome to CyclingForums.com You are currently viewing our website as a guest which gives you limited access to view most discussions. You will have to register before you can post to this thread. By joining our free online community you will have access to post new topics, communicate privately with other cyclingforums.com members (PM), respond to polls, upload photos and access other special features like product reviews and classifieds. |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
15-03.-2005, 10:34 PM
|
#1 |
|
Registered User
Join Date: Mar 2005
Posts: 2
|
single speed conversion - HELP
After riding mountain bikes for years, am now getting into single speed. Have been riding a Colnago with horizontal drop outs, old wheels and 7-speed casette with shortened chain on 17T sprocket.
I need new wheels as old ones are knackered but am getting conflicting advice from bike shops. Some say just get standard rear wheel with freewheel hub and split up a casette, use washers and choose best sprocket. Others say get a wheel built with fixed hub and freewheel sprocket. Help! What is the best way to go. |
|
|
|
17-03.-2005, 05:07 PM
|
#2 |
|
Registered User
Join Date: Jun 2004
Location: th' ghet-to
Posts: 26
|
Re: single speed conversion - HELP
A real single-speed offers a bit better stance insofar as dish is concerned. Also, new wheels are shiny and pretty, and everyone knows that shiny, pretty things go faster.
|
|
|
|
|
18-03.-2005, 09:10 AM
|
#3 |
|
Registered User
Join Date: Feb 2005
Posts: 20
|
Get a Single-speed Specific Wheel
If you need to buy a new wheel AND you know that you are going single-speed, there's no good reason to buy a wheel with a normal hub unless you want the option of converting the bike back to having gears. Buy or build a wheel with a flip-flop single-speed hub so that you have the option of going fixed or free. As previously mentioned, a geared hub is dished to make room for the cogset so a single-speed hub will make for a stronger wheel.
|
|
|
|
|
29-04.-2005, 06:28 AM
|
#4 |
|
Registered User
Join Date: Apr 2004
Location: Sacramento, CA
Posts: 12
|
Re: single speed conversion - HELP
The way I went was to find a built wheel with a freewheel hub, re-dished (un-dished?) the wheel and ran a single speed freewheel. That's the CHEAPEST way.. If I had my druthers... I'd build a wheel with a Phil Wood Free/fixed hub...
Jeremy |
|
|
|
|
19-05.-2005, 08:37 AM
|
#5 |
|
Registered User
Join Date: Mar 2004
Location: North Brunswick, NJ
Posts: 122
  |
Re: single speed conversion - HELP
My mtn bike has vertical drops. I used a White Industries ENO Eccentric hub. Love it.
|
|
|
|
|
20-05.-2005, 02:20 AM
|
#6 | |
|
Registered User
Join Date: Aug 2004
Location: Oakland, California
Posts: 266
|
Re: single speed conversion - HELP
Quote:
__________________
Smartty |
|
|
|
|
|
24-05.-2005, 04:13 PM
|
#7 | |
|
Registered User
Join Date: Oct 2003
Location: Bend, Oregon
Posts: 4
|
Re: single speed conversion - HELP
I purchased a set of wheels from nycbikes.com that have flip-flop hubs. I run fixed most of the time but flip to the freewheel side in the snow and heavy rain.
Quote:
|
|
|
|
|
|
07-12.-2005, 01:50 PM
|
#8 | |
|
Registered User
Join Date: Oct 2003
Location: Melbourne, Australia
Posts: 141
|
Re: single speed conversion - HELP
Quote:
Yeah, ditto, but where I grew up it was always blowin' dogs off chains...there and back... |
|
|
|
|
Linear Mode
