Today's Forum Topics
Set as homepage
|
View
New Forum Topics Today's Forum Topics Set as homepage |
 |
|
|||||||
Welcome to CyclingForums.com You are currently viewing our website as a guest which gives you limited access to view most discussions. You will have to register before you can post to this thread. By joining our free online community you will have access to post new topics, communicate privately with other cyclingforums.com members (PM), respond to polls, upload photos and access other special features like product reviews and classifieds. |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
21-03.-2008, 05:55 AM
|
#1 |
|
Registered User
Join Date: Mar 2008
Posts: 1
|
Help - Cycle Computer
Just purchased a Trek 7.3 Bike - first bike in 20 years. I have a cycle computer Tri-Pro - need to set the wheel Size.
The bike is fitted with 700C wheels and the wheel setting is between 170.0 and 290.0. Can someone please help - I guessed at 280.0 but not sure 700C being 28 inch..... Thanks James |
|
|
|
21-03.-2008, 06:41 AM
|
#2 |
|
Registered User
Join Date: Dec 2006
Location: South Western Ohio, USA
Posts: 1,533
|
Re: Help - Cycle Computer
Do a roll out James. Take your bike to a good flat cement surface. Draw a line. Place one of the tires directly on top of the line with the valve stem in the six o'clock position. Roll the bike perpendicular to the first line until the valve stem is in the six o'clock position again, i.e. one complete revolution. Draw a line where the tire ended up. Measure the distance between the first line and the second line. This is the circumferece of your tire.
This method is very accurate. All tires are a little different in their actual inflated size, so actually measuring the tire on the bike is much better than trying to figure it out mathmatically.
__________________
One life, one chance. Don't waste it! |
|
|
|
|
21-03.-2008, 02:57 PM
|
#3 |
|
Registered User
Join Date: Mar 2007
Posts: 9
|
Re: Help - Cycle Computer
kdelong is right. You should also make sure the tires are properly inflated and put a little of your wieght on the bike to simulate the compression on the tires when you're actually riding. It is only slightly more acurate, though.
|
|
|
|
Linear Mode
