Today's Forum Topics
Set as homepage
|
View
New Forum Topics Today's Forum Topics Set as homepage |
 |
|
|||||||
Welcome to CyclingForums.com You are currently viewing our website as a guest which gives you limited access to view most discussions. You will have to register before you can post to this thread. By joining our free online community you will have access to post new topics, communicate privately with other cyclingforums.com members (PM), respond to polls, upload photos and access other special features like product reviews and classifieds. |
 |
|
|
Thread Tools | Search this Thread | Display Modes |
28-04.-2008, 11:24 PM
|
#1 |
|
Registered User
Join Date: Dec 2004
Location: Ealing
Posts: 8
|
velocity oc build problems
Hi,
Just wanted to ask if any other builders have had problems getting the spoke tension even around the joint of aerohead OC (rear) rims? I've had two builds in a row where I was stuck with VERY low tension in a single spoke at the join, with two VERY highly tensioned spokes on each side, almost like the rim was pre-bent. Any theories? Thanks, Scherrit. |
|
|
|
28-04.-2008, 11:57 PM
|
#2 | |
|
Registered User
Join Date: Sep 2003
Location: Suburban Chicago
Posts: 2,744
|
Re: velocity oc build problems
Quote:
It is hard for me to tell without seeing and working with the specific samples. However, I have experienced a couple of Velocity rims that had a poory aligned joint. Velocity USA provides excellent support and replacement. I regularly use Velocity and it it rare to have the rim joint issue.
__________________
David Ornee, Western Springs, IL USA |
|
|
|
|
|
29-04.-2008, 12:10 AM
|
#3 |
|
Registered User
Join Date: Dec 2004
Location: Ealing
Posts: 8
|
Re: velocity oc build problems
Thanks so much for yr quick reply... the second rim when unspoked was perfectly flat (after the first one I checked the second rim against a big pane of glass).
I just wondered if I'd missed a trick with OC rims? Cheers, S. |
|
|
|
|
29-04.-2008, 12:25 AM
|
#4 | |
|
Registered User
Join Date: Sep 2003
Location: Suburban Chicago
Posts: 2,744
|
Re: velocity oc build problems
Quote:
The splice material added at the joint makes the rim stiffer there. Usually the added stiffness is not an issue because the joint comes out well aligned with increasing spoke tension. However, there are exceptions and I have found a couple....
__________________
David Ornee, Western Springs, IL USA |
|
|
|
|
Linear Mode
