Bicycle trainer

A Hunter

Since I live in sunny Scotland where it never rains...but it sure does pour and the wind doesn't
blow but it howls through the winter months (and let's face it half the summer months too!) I am
intending to buy a trainer and am looking for advice on the best type for a novice rider.

Joe

Draftnut

Stay away from wind trainers. They just too noisy! I just got a Minoura trainer (mag 850) with the
remote tension thingy that clips to your bars. I like it and it's pretty quiet.

I feel your pain.....I live in the central valley of Ca. doesn't rain too much, but it sure is
foggy....a lot! I've been using my trainer on really foggy days.

Best of Luck,

DraftNut

"A Hunter" <alijoe65@hotmail.com> wrote in message
news:VXZX9.19$3Z.24955@newsfep1-win.server.ntli.net...
> Since I live in sunny Scotland where it never rains...but it sure does
pour
> and the wind doesn't blow but it howls through the winter months (and
let's
> face it half the summer months too!) I am intending to buy a trainer and
am
> looking for advice on the best type for a novice rider.
>
> Joe

Budman

My first recommendation would by a CycleOps Fluid2. I do not know if they are available in the UK.
The resistance range on this trainer is great. Keep the gear low enough and anyone can spin it. Put
the gearing up and hammer, the workout is enough to make your really sweat. This was the best
resistance trainer I have used, until I discovered riding rollers. "A Hunter" <alijoe65@hotmail.com>
wrote in message news:VXZX9.19$3Z.24955@newsfep1-win.server.ntli.net...
> Since I live in sunny Scotland where it never rains...but it sure does
pour
> and the wind doesn't blow but it howls through the winter months (and
let's
> face it half the summer months too!) I am intending to buy a trainer and
am
> looking for advice on the best type for a novice rider.
>
> Joe

Chris Phillipo

In article <VXZX9.19$3Z.24955@newsfep1-win.server.ntli.net>, alijoe65 @hotmail.com says...
> Since I live in sunny Scotland where it never rains...but it sure does pour and the wind doesn't
> blow but it howls through the winter months (and let's face it half the summer months too!) I am
> intending to buy a trainer and am looking for advice on the best type for a novice rider.
>
> Joe
>
>
>

Minoura 500R or Blackburn Basic trainers are the best bang for the buck.
--
_________________________
Chris Phillipo - Cape Breton, Nova Scotia http://www.ramsays-online.com

Thomas Reynolds

I agree with BudMan's opinion of the CycleOps Fluid2. I have been using trainers for several years
and this is the best one that I have had. It's not cheap, however, ~$270 US.

The biggest problem I have had with trainers is the resistance unit failing. I have only had the
Fluid2 for about six months so I can't speak to its reliability.

BTW, I live in San Diego where weather is not much of a problem. I use a trainer because it provides
a controlled environment.

Tom

"BudMan" <budman_@yahoo.com> wrote in message news:<iH1Y9.2098$IN1.743@nwrddc02.gnilink.net>...
> My first recommendation would by a CycleOps Fluid2. I do not know if they are available in the UK.
> The resistance range on this trainer is great. Keep the gear low enough and anyone can spin it.
> Put the gearing up and hammer, the workout is enough to make your really sweat. This was the best
> resistance trainer I have used, until I discovered riding rollers. "A Hunter"
> <alijoe65@hotmail.com> wrote in message news:VXZX9.19$3Z.24955@newsfep1-win.server.ntli.net...
> > Since I live in sunny Scotland where it never rains...but it sure does
> pour
> > and the wind doesn't blow but it howls through the winter months (and
> let's
> > face it half the summer months too!) I am intending to buy a trainer and
> am
> > looking for advice on the best type for a novice rider.
> >
> > Joe
> >

steve

Dont get a wind trainer, go for a mag or fluid training, they not as noisy as wind trainers

cheers!

__________________
Steve

CyclingForums.com

Monty Montgomer

My Minoura Mag Trainer is in the basemant not being used. It has a handlebar mounted resistance
selector. 1 to 5. After a couple of years the resistance would increase as I went from 1 to 3, then
after 3 the resistance decreased. If I just wanted to spin it was great, but if I wanted to simulate
climbing it didn't cut it.

I'm using a CycleOps Fluid2 now. It's great.

Monty

"Thomas Reynolds" <treynolds@my-deja.com> wrote in message
news:ad7a9af4.0301240929.60c6c337@posting.google.com...
> I agree with BudMan's opinion of the CycleOps Fluid2. I have been using trainers for several years
> and this is the best one that I have had. It's not cheap, however, ~$270 US.
>
> The biggest problem I have had with trainers is the resistance unit failing. I have only had the
> Fluid2 for about six months so I can't speak to its reliability.
>
> BTW, I live in San Diego where weather is not much of a problem. I use a trainer because it
> provides a controlled environment.
>
> Tom
>
> "BudMan" <budman_@yahoo.com> wrote in message
news:<iH1Y9.2098$IN1.743@nwrddc02.gnilink.net>...
> > My first recommendation would by a CycleOps Fluid2. I do not know if
they
> > are available in the UK. The resistance range on this trainer is great. Keep the gear low enough
> > and anyone can spin it. Put the gearing up and hammer, the workout is enough to make your really
> > sweat. This was the
best
> > resistance trainer I have used, until I discovered riding rollers. "A Hunter"
> > <alijoe65@hotmail.com> wrote in message news:VXZX9.19$3Z.24955@newsfep1-win.server.ntli.net...
> > > Since I live in sunny Scotland where it never rains...but it sure does
> > pour
> > > and the wind doesn't blow but it howls through the winter months (and
> > let's
> > > face it half the summer months too!) I am intending to buy a trainer
and
> > am
> > > looking for advice on the best type for a novice rider.
> > >
> > > Joe
> > >
>

Joe Hunter

Thanks for all the advice guys, it's good to hear other people's opinions on things...

Of course a better idea would be just to leave the country for somewhere with decent weather but I
don't suppose the family would go for that!!!

Thanks again Joe

Per ElmsäTer

Nobody seems to mention the Tacx trainers. That seems to be almost the only thing we can buy around
here ( Sweden ). Can anybody give a comparison between for instance the CycleOps Fluid2 and the
Tacx Basic?

--
Replace the dots to reply

Perre

"A Hunter" <alijoe65@hotmail.com> wrote in message
news:VXZX9.19$3Z.24955@newsfep1-win.server.ntli.net...
> Since I live in sunny Scotland where it never rains...but it sure does
pour
> and the wind doesn't blow but it howls through the winter months (and
let's
> face it half the summer months too!) I am intending to buy a trainer and
am
> looking for advice on the best type for a novice rider.
>
> Joe

Harris

"DraftNut" wrote:
> Stay away from wind trainers. They just too noisy!

I love my "Turbo" wind trainer. I have two sets of resistance fans on it (above and below the rear
wheel), and find it simulates the feel of road very well. Noisy? Huh? What did you say?

Art Harris

Peter Cole

"Jon Isaacs" <jonisaacs@aol.com> wrote in message
news:20030125062043.11417.00000224@mb-cp.aol.com...
> >I agree with BudMan's opinion of the CycleOps Fluid2. I have been using trainers for several
> >years and this is the best one that I have had. It's not cheap, however, ~$270 US.
>
> >The biggest problem I have had with trainers is the resistance unit failing. I have only had the
> >Fluid2 for about six months so I can't speak to its reliability.
>
> As far as I know, this is a problem limited to fluid trainers, both mag and wind trainers are so
> simple that in my experience the resistance units never fail. Fluid trainers build up heat and can
> blow the hydraulic seals,
resulting
> in a mess.
>
> Personally i like a simple folding mag trainer. Quiet, inexpensive and reliable.

I heard a few reports of mag trainer self-destructing, so I was wary. When my Blackburn started
making noise, I opened it up to take a look. The resistance unit consists of 2 stationary plates
with what look like refrigerator magnets glued to them. There's an axle-mounted rotating plate
between the 2 magnet plates, held with a single set screw. On my unit the screw had loosened, and
the wobbling plate was scraping the magnets. I have no doubt the innards would have scrambled
themselves if I kept on using it. That said, the single screw appeared to be the only possible
failure point, the rest of it was dead simple, and very beefy looking. Short of the loose screw, I
think reliability is a given. Very quiet, too.

Actually34

I have been extremely satisfied with the 1-UP USA Trainer.

See the following Web site for a review of it and other trainers:

http://a.tribalfusion.com/p.media/C...KOROYOTDRPXCFLS
MLOQMSQHDMLFPMECFLCKDOMUESNPOC/40996/pop.html

Sparhawk

On 28 Jan 2003 20:41:03 GMT, actually34@aol.com (Actually34) wrote:

>I have been extremely satisfied with the 1-UP USA Trainer.
>
>See the following Web site for a review of it and other trainers:
>
>http://a.tribalfusion.com/p.media/C...KOROYOTDRPXCFLS
>MLOQMSQHDMLFPMECFLCKDOMUESNPOC/40996/pop.html

Yep that's a good one if you can't afford a Computrainer.

Sparhawk

Terry Morse

[posted and mailed, because my news server isn't propagating postings]

Peter,

I have a Blackburn mag trainer, too, and it's gotten pretty noisy lately. It tends to "roar" at
certain combinations of speed and resistance. I checked the bearings for slop, and there is none.
Maybe I need to disassemble it. Would you describe the noise yours was making as a "roar"?

Thanks, terry