Need to confirm what lube should be used in the freehub lube port on a '95 Campty Record hub. Oil or grease?
Just finished disassembling and servicing the rear hub. Replaced axle cones, balls, greased the bearings and the freehub ratchet pawls.
I also noticed a lubrication port in the freehub body itself - seems to lubricate only the 2 x sealed cartridge bearings. I squirted in some Weldtite cycle grease with teflon, until all old grease came out. The hub seems to run quite stiffly now with this grease in place - only when not coasting (When coasting, the ratchet pawls run quite freely and the sealed bearings in the freehub to not turn) Have I used the wrong lube for this port?