Separate names with a comma.
The "buy to try" strategy sounds reasonable. I don't want him to think he's investing in a handcrafted frame that's worthy of an Ultegra or Chorus...
A local seller has a steel frame Bianchi Eros for about $125. The frame appears to be in very good condition with only a couple of paint chips and...
I'm trying to mount Continental Top Touring 2000 tires, 700x28 kevlar bead, on a Mavic T221 rim that measures about 17.5mm between the inside...
Trying to consolidate lots of useful information in this thread. While riding my first bike with light weight racing tires I got a rim cut,...
I commute 75 miles a week and have found cleaning and lubricating the chain weekly gives good results. That's riding in dry conditions. If I let...
Thanks for the tip on using a boot. And you're right, the objective defines the solution. I'm better off with a damage resistant tire that may...
I was on the fourth weekend ride with my new bike, the first nice one I've owned. It has Bontrager X-Lite wheels and (unfortunately) Bontrager...
Start with the recommended max. That'll provide the lowest rolling resistance and minimize the chance of a pinch flat (pinching an underinflated...
The mounting holes are there, the front holds a bolt that secures the cable stop for the brake cable running to the cantilever yoke. The back one...
I want to replace the Avid Shorty 4 cantilevers on my cyclocross commuter with road calipers. I have Mavic T221 wheels with a 21mm rim and use a...
If you're in traffic (auto or pedestrian) you should do without. Any headset/earbud is going to keep you from hearing at a safe level and any form...
Some things I'm thankful for this year... 1. My new ride...and a job that let's me afford it. If prices continue rising like they are now, by...
A 2002 Jamis Nova cyclocross bike. It's not particularly light, but the steel frame and wider tires (37mm stock, since replaced with 32mm street...
http://www.nashbar.com/profile.cfm?category=&subcategory=1041&brand=&sku=10037&storetype=&estoreid= I bought the Lake BMX-60 from Nashbar about...
My current chain has been in use for 6,000+ miles. It's started jumping to a lower cog on the cassette during hard climbs. It's probably stretched...
Had to jump in since the Park chain checker turned up in the thread. My commute covers 75 miles a week on dry roads over very hilly terrain. More...
I'll try emailing them and see what they say. I wanted to make sure I was aligning the parts in the chuck correctly so I dug out the instructions...
I'll see if a local shop has replacement parts for the valve clamp. If it isn't sealing it has to be a problem with the gasket...too hard or too...
Thanks to all for replying. I'll see if the LBS has examples I can try before buying. The pump is in keeping with tradition (the few, the proud,...
I was overlooking CO2 because I read many posts where a broken inflator or bad seal left the rider stranded. If there's a model that doesn't fail...