Separate names with a comma.
I'd suspect the battery on your head unit is starting to go. I had the same symptoms, and then the battery died. As for how I found out about the...
There is a trick to adjusting contrast on the unit via the engineering diagnostic menu. Press all 4 outside buttons simultaneously. This will...
I've seen this kind of behaviour with old batteries that need to be changed. Do not use rechargeables. Best performance I've found is with the...
I'm heading there in May. Normally ride a DA 53-39 front, 12-25 rear. I'm thinking of going with an Ultegra SL compact 50-34 front, and getting...
My friends and I have purchased a number of these on Ebay. New units. Out of 6 purchased, 3 worked perfectly right out of the box, and 3 had...
When I got mine, the chain speed sensor was defective. Had to call polar and they sent me a new one.
I've got a Cycleops Fluid 2 trainer, and the power readings I get on the CS600 match very closely to the power curves that have been published for...
My wife and I have CS600 Power meters. I've installed three others in my cycling group. They all work just fine. We are all using the power...
Just came back from a 2 hour ride with two buddies. Theyve got PT's, Ive got the CS600. We all matched within reasonable amounts. I'm happy!
Well,.......... I've got a CS600 power, with a Cycleops fluid 2 trainer and its pretty well spot on with the power curve that is published for...
LOL. Replied before reading all posts!!! Duhhhhh.
You might want to remove all devices, relearn the power module, and make sure Power and cadence are checked on the bike settings on the cs600....
Perhaps we might want to summarize from all the posts here what the potential problems are as a convenience to someone encountering this thread...
I've installed them on two Cervelo's (an R3 and a P3C) and a new Madone 5.5 and all three are working great in all gears. (I did the constant...
Assuming chain weight and chain stay length is accurate via measurements, I would trust the Polar. I use my bike on a Cycleops Fluid 2 and the...
I've got the Polar CS600, and here's what I get on the old model Fluid 2. It supports what you said...... mph watts 6...
If you think of the chain line as a diagonal line between the chain rings and cassette, and depending on the gear combo, the line changes angles,...
I will let T.A. chime in, but my experience is that its all about the gap between the sensor and the chain. The alignment (parallel to chain...
Right! And the numbers that KK suggest you put in the KK computer when you're using a Fluid 2 are for the older unit. When you use them on a new...
No argument.....I'm enjoying this discussion. Its my fault, I think I havnt been clear. Yes, you are correct. For the person with the easier...