C
cliff
Guest
I have a Shimano DA10 speed drive train with an FSA K-force crank with
FSA 53/39 chainrings. Recently (after about 1K miles on the chain) the
DA 10 chain began to ride between the rings when downshifting the
front. The chain is not elongated, I've checked the fd adjustment, and
I've lubed the chain which actually helped a bit. Of course, this
happens more when the rear is in the outer four cogs, but it didn't
happen for the first 1k miles. Any ideas? TIA
FSA 53/39 chainrings. Recently (after about 1K miles on the chain) the
DA 10 chain began to ride between the rings when downshifting the
front. The chain is not elongated, I've checked the fd adjustment, and
I've lubed the chain which actually helped a bit. Of course, this
happens more when the rear is in the outer four cogs, but it didn't
happen for the first 1k miles. Any ideas? TIA