10spd Cams Campagnolo



I'd recommend that you get a set of 'G' springs. While changing the
disk, you can renew the springs.

Your local shop can get the shift disk for you. Few shops stock them.
The part is ~$35.

On Wed, 14 Apr 2004 13:30:33 -0400, S Morrison <[email protected]>
wrote:

>Looking to buy the 10spd cam to convert a 9spd campagnolo lever to 10
>spd. Information or offer requested.
>
>[email protected]
>
>Thanks,
>Scott
 
scott-<< Looking to buy the 10spd cam to convert a 9spd campagnolo lever to 10
spd. Information or offer requested >><BR><BR>

We have them, $35 for the rear disc, $10 for the front bushing+ shippng.
Remember you can convert 1999 and later 9s levers only.

Peter Chisholm
Vecchio's Bicicletteria
1833 Pearl St.
Boulder, CO, 80302
(303)440-3535
http://www.vecchios.com
"Ruote convenzionali costruite eccezionalmente bene"
 
S Morrison <[email protected]> wrote in message news:<[email protected]>...
> Looking to buy the 10spd cam to convert a 9spd campagnolo lever to 10
> spd. Information or offer requested.

The FAQ on Campy's Web site says the following:
"Can the right 9s Ergopower lever ('99-'02) be modified into a 10s lever?

"No, because of dimensional differences between the internal mechanisms."

**** Durbin
Tallahassee
 
ddurbin-<< The FAQ on Campy's Web site says the following:
"Can the right 9s Ergopower lever ('99-'02) be modified into a 10s lever?

"No, because of dimensional differences between the internal mechanisms."
>><BR><BR>

I guess I should send the receipts of this conversion I have done...probably no
more than a few DOZEN...They say this because of the said differences of the
rear ders, another non-iisue and the only 10s cams are newer style. BUT it just
ain't so. i have done this many times.



Peter Chisholm
Vecchio's Bicicletteria
1833 Pearl St.
Boulder, CO, 80302
(303)440-3535
http://www.vecchios.com
"Ruote convenzionali costruite eccezionalmente bene"
 
On 16 Apr 2004 12:52:08 GMT, [email protected] (Qui si parla
Campagnolo ) wrote:

>
>I guess I should send the receipts of this conversion I have done...probably no
>more than a few DOZEN...They say this because of the said differences of the
>rear ders, another non-iisue and the only 10s cams are newer style. BUT it just
>ain't so. i have done this many times.
>
>
>
>Peter Chisholm

I find it entertaining that their distributors offer or used to offer
conversion information and so will their tech support people.

I'd think that being able to convert shifter to 8, 9 or 10 sp would be
a selling feature instead of something to try to hide.
 
Paul-<< I'd think that being able to convert shifter to 8, 9 or 10 sp would be
a selling feature instead of something to try to hide. >><BR><BR>

Me too...considering the inability to do same to the 'competitors' levers...

Peter Chisholm
Vecchio's Bicicletteria
1833 Pearl St.
Boulder, CO, 80302
(303)440-3535
http://www.vecchios.com
"Ruote convenzionali costruite eccezionalmente bene"
 
[email protected] (Qui si parla Campagnolo ) wrote in message news:<[email protected]>...
> Paul-<< I'd think that being able to convert shifter to 8, 9 or 10 sp would be
> a selling feature instead of something to try to hide. >><BR><BR>
>
> Me too...considering the inability to do same to the 'competitors' levers...

What it did was convince me that I needed to buy new shifters because,
according to Campy, you can't update my 9 speed shifters to 10 speed.
I am more than a little ****** at Campy right now.
 
ddurbin-<< What it did was convince me that I needed to buy new shifters
because,
according to Campy, you can't update my 9 speed shifters to 10 speed.
I am more than a little ****** at Campy right now. >><BR><BR>

As it should. There is a lot of poor information on the web, not just from
Campagnolo, but also from some web sellers that will tell you things about
Campagnolo that in practice just aren't true.

Why guys like me and Andy Muzi wander wround the NGs.

Peter Chisholm
Vecchio's Bicicletteria
1833 Pearl St.
Boulder, CO, 80302
(303)440-3535
http://www.vecchios.com
"Ruote convenzionali costruite eccezionalmente bene"
 
On 17 Apr 2004 19:50:49 -0700, [email protected] (**** Durbin) wrote:

>What it did was convince me that I needed to buy new shifters because,
>according to Campy, you can't update my 9 speed shifters to 10 speed.
>I am more than a little ****** at Campy right now.

I'd be interested in buying your outdated shifters.
 
Paul Kopit <[email protected]> wrote in message news:<[email protected]>...
> On 17 Apr 2004 19:50:49 -0700, [email protected] (**** Durbin) wrote:
>
> >What it did was convince me that I needed to buy new shifters because,
> >according to Campy, you can't update my 9 speed shifters to 10 speed.
> >I am more than a little ****** at Campy right now.
>
> I'd be interested in buying your outdated shifters.

E-mail me at [email protected]

**** Durbin
 
You must log in or register to reply here.
Top Bottom Back