hi,
I modify road 11s cassettes (DA, Ultegra, 105, force, Rival) so that they fit perfectly on 9-10 speed hubs.
Work is done on a lathe with a special jig. You get 11 speed that work like they should on your favorite set of wheel. I have done cassettes that went on Shimano, Reynolds, Easton, HED, Zipp, Bontrager, Asian copie and so far I have 100% satisfaction feed-back from clients. No re-dish of the wheel necessary.
Just install cassette, check derailleur adjustment (most of time not necessary but suggested) and ride!
Cassette can be later used on a 11s hub using a 1.85mm Shimano cassette spacer. Minimum size is 25 teeth. Pricing (US) is 125$ for Ultegra cassette or 45$ if you send me your own cassette.
I am in Montreal,Quebec and can be reached at 514-993-0510 or [email protected]a for more details
I modify road 11s cassettes (DA, Ultegra, 105, force, Rival) so that they fit perfectly on 9-10 speed hubs.
Work is done on a lathe with a special jig. You get 11 speed that work like they should on your favorite set of wheel. I have done cassettes that went on Shimano, Reynolds, Easton, HED, Zipp, Bontrager, Asian copie and so far I have 100% satisfaction feed-back from clients. No re-dish of the wheel necessary.
Just install cassette, check derailleur adjustment (most of time not necessary but suggested) and ride!
Cassette can be later used on a 11s hub using a 1.85mm Shimano cassette spacer. Minimum size is 25 teeth. Pricing (US) is 125$ for Ultegra cassette or 45$ if you send me your own cassette.
I am in Montreal,Quebec and can be reached at 514-993-0510 or [email protected]a for more details
Last edited: