3-hole Look Pedal Metal Plate for Shimano shoes



K

karoline lerang

Guest
Does anybody know if it is easy to purchase the metal plate that goes inside
a Shimano racing shoe so that I can use it with Look pedals ? Is there any
part number?

The shoe is Shimano SH-R212, the metal plate that is in there at the moment
only has holes for SPD pedals.

Thx..
 
The spare plate should have been in the box with your shoes. The shop
that you bought them from should be able to order them from Shimano.
They might even have some in stock, if they are worth their salt.
Very good shoes.
 
"A Muzi" <[email protected]> wrote in message
news:[email protected]...
> karoline lerang wrote:
> > Does anybody know if it is easy to purchase the metal plate that goes

inside
> > a Shimano racing shoe so that I can use it with Look pedals ? Is there

any
> > part number?
> > The shoe is Shimano SH-R212, the metal plate that is in there at the

moment
> > only has holes for SPD pedals.

>
> First, check carefully to see if there aren't more holes,
> perhaps plugged or covered. Many shoes are compatible with
> both formats.



The LOOK holes are in the shoe, its just the metal plate that only has
threads for SPD cleats.

I need a new plate....but the local shops don't know how to order...it
usually comes with the Shoe, but these (one year old) didn't.

>
> Second, while the SPD type cleat systems have a screw fixed
> in the cleat and an insert that floats inside the shoe, Look
> pattern cleats are the inverse. Each screw goes into a
> single fixed hole in the shoe. The position adjustment's
> inside the cleat instead.
>
> In the early days of Look, the first widely accepted
> clipless system, dealers had fixtures to drill shoes and
> inserts to press through the sole. See if your LBS has such
> and if not, email me -we do.
>
> Lastly, unless your shoes have sentimental value, have you
> thought about a pair of SiDi shoes? They sure fit well and,
> IMHO, enhance one's riding experience all out of proportion
> to their cost. A good deal.
> --
> Andrew Muzi
> www.yellowjersey.org
> Open every day since 1 April, 1971
>
 
What you need is called a "cleat fixing nut" or just a "cleat nut." If
you contact Shimano USA, they can give you the part number so that
your shop can order it. The problem is that your shop doesn't want to
special order a $2.00 part. They would rather sell you a new $200.00
pair of shoes. Even if you get the part number from Shimano, your shop
may tell you that they need to place a minimum order from Shimano to
get them.
A large, high quality shop should have a few of these laying around.
You might want to call around to all the shops in your area.
 
On 24 Apr 2004 20:11:05 -0700, [email protected] (Bill K.) wrote:

>What you need is called a "cleat fixing nut" or just a "cleat nut." If
>you contact Shimano USA, they can give you the part number so that
>your shop can order it. The problem is that your shop doesn't want to
>special order a $2.00 part. They would rather sell you a new $200.00
>pair of shoes. Even if you get the part number from Shimano, your shop
>may tell you that they need to place a minimum order from Shimano to
>get them.
>A large, high quality shop should have a few of these laying around.
>You might want to call around to all the shops in your area.


I will be in Japan for several days next month, if anyone is
interested. Nothing like going directly to the source for parts.

Michael J. Klein

Please replace mousepotato with asiancastings
 
"Michael J. Klein" <[email protected]> wrote in message
news:[email protected]...
> On 24 Apr 2004 20:11:05 -0700, [email protected] (Bill K.) wrote:
>
> >What you need is called a "cleat fixing nut" or just a "cleat nut." If
> >you contact Shimano USA, they can give you the part number so that
> >your shop can order it. The problem is that your shop doesn't want to
> >special order a $2.00 part. They would rather sell you a new $200.00
> >pair of shoes. Even if you get the part number from Shimano, your shop
> >may tell you that they need to place a minimum order from Shimano to
> >get them.
> >A large, high quality shop should have a few of these laying around.
> >You might want to call around to all the shops in your area.

>
> I will be in Japan for several days next month, if anyone is
> interested. Nothing like going directly to the source for parts.
>
> Michael J. Klein
>
> Please replace mousepotato with asiancastings


Thanks Michael, very kind of you....I won't take you up as I'm in Europe,
I'll keep using the old spd pedals until I come across a bike shop that can
help with the plate.