Can I use 7 cogs on this freewheel? If so what are the parameters?
Thanks,
Cycling Equipment · Public discussion
6 speed uniglide freewheel
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 9 November 2004
- Last activity
- 9 November 2004
- Original author
- KENLH
- Posts
- 4
- Discussion status
- Public discussion
- Total views
- 885
- Views / 30 days
- 0
- Topics
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
KENLH said:
Can I use 7 cogs on this freewheel? If so what are the parameters?
Thanks,UG Cogs spaced 5 mm.
-
KENLH said:
Can I use 7 cogs on this freewheel? If so what are the parameters?
Like an MF-6208 or MF-Z012? No. The seven speed model
MF-5000 had a longer body. The threaded section on the end
of the seven body takes two threaded cogs.--
Andrew Muzi
www.yellowjersey.org
Open every day since 1 April, 1971 -
can i then use hyperglide cogs with the wide tab ground down with the smaller spacers on the existing freewheel body?
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.