On Dec 9, 9:00 am, datakoll <
[email protected]> wrote:
> On Dec 9, 8:56 am, datakoll <[email protected]> wrote:
>
> >http://www.zymetrical.com/images/products/shock-magic-marker.jpg
>
> > is the dial gauge pleasant in use?
> > or is the DG another PITA?
> > how long (baby how long) does a dial gauge last?
>
> allow me a rephrase:
> if you give a dial guage to a monkey
> will the monkey break it?
http://www.zymetrical.com/images/products/shock-magic-marker.jpg
cutting and pasting "BEADY'S DIY ORBITAL TOURISM ROCKET" is unfair
but humbug is in this season.
"With some practice, you can build or adjust wheels to within +/- .005
inches, for both roundness and trueness" oh good.
Sure: first train your eyes...
"The low price is achieved by using": GARBAGE! particle board? .060?
5 screws? Is this iconic?
You can also use any other wheel stand you might already have, as long
as it has mounting holes on the bottom." SWIPE YOUR BUDDY'S LONG HAUL
TRUCKER AND CUT THE REAR TRIANGLE OUT!
"You should perform all initial steps of wheel building and
adjustments without the dial gauge" initial steps? Like running the
wheel into an 8buh pothole?
Lookit the photos. Why not dangle the DG from the ceiling with fishing
line? Makes you weep, no?
Jus take the rear triangle, bolt it's Seat Post to a tubah4 bolted to
(if you can see by this stage) 3/4" plywood (painted flat white), mount
the wheel then figure how to bolt angle iron (from cast off bed
mattress frames) off the ply to hold the DG.
That beats 100 bucks. Scrounge dude scrounge.
And don't forget the magic markers in different colors. Also tape,
clear and black: for the spokes ends of bend, center of bend.
Merry xmas!