D
I've worn out the middle ring on my old Bridgestone MB-3, and after
also just replacing my rear cassette, I'm thinking I'll just replace
all the rings at once. This is a 24-36-46 ring set, 110mm/74mm bolt
pattern, 7 speed. The original rings are Shimano SG "C".
It looks like I can get flat aluminum replacements (Salsa or Sugino)
for roughly $20+$20+$30 from various sources. I can substitute the
middle and outer rings with Shimano SG-X rings for an extra $20. I
think I'd prefer those for smoother shifting. Anything else I should
consider here? I think the SG-X rings are 7-speed compatible?
-- Dave
also just replacing my rear cassette, I'm thinking I'll just replace
all the rings at once. This is a 24-36-46 ring set, 110mm/74mm bolt
pattern, 7 speed. The original rings are Shimano SG "C".
It looks like I can get flat aluminum replacements (Salsa or Sugino)
for roughly $20+$20+$30 from various sources. I can substitute the
middle and outer rings with Shimano SG-X rings for an extra $20. I
think I'd prefer those for smoother shifting. Anything else I should
consider here? I think the SG-X rings are 7-speed compatible?
-- Dave