Barnett Bicycle Manuals In PDF?

Discussion in 'Cycling Equipment' started by Tom Dimauro, Feb 10, 2003.

Thread Status:
Not open for further replies.
  1. Tom Dimauro

    Tom Dimauro Guest

    Does anyone have the PDF files for the Barnett manuals?? I have downloaded several chapters
    some time back from the specialized web site but would like the complete set. I would
    appreciate any help.

    Thanks, .....................................
     
    Tags:


  2. http://rideitbent.net/

    T:jom

    Tom DiMauro wrote:

    > Does anyone have the PDF files for the Barnett manuals?? I have downloaded several chapters
    > some time back from the specialized web site but would like the complete set. I would
    > appreciate any help.
    >
    > Thanks, .....................................
     
  3. Bantae

    Bantae Guest

    How many chapters are there?

    Eric

    > Tom DiMauro wrote:
    >
    > > Does anyone have the PDF files for the Barnett manuals?? I have downloaded several chapters
    > > some time back from the specialized web site but would like the complete set. I would
    > > appreciate any help.
    > >
    > > Thanks, .....................................
     
  4. Tom Dimauro

    Tom Dimauro Guest

    BARNETT'S MANUAL (4th Edition) TABLE OF CONTENTS:

    (#) = (Volume number)
    (1) 13 - Cartridge-Bearing Hubs
    (2) 27 - Chainline

    (3) Introduction
    (4) 14 - Adjustable-Cone/Cup Pedals
    (5) 28 - Handlebars, Stems, And Handlebar Extensions

    (6) 1 - Basic Mechanical Skills
    (7) 15 - Cartridge-Bearing Pedals
    (8) 29 - Seats And Seatposts

    (9) 2 - Tapping Bottom-Bracket Shell Threads
    (10) 16 - Wheel Building And Rim Replacement
    (11) 30 - Shift-Control Mechanisms

    (12) 3 - Facing The Bottom-Bracket Shell
    (13) 17 - Wheel Truing And Repair
    (14) 31 - Derailleur-Cable Systems

    (15) 4 - Reaming And Facing The Head Tube
    (16) 18 - Wheel Removal, Replacement, And Installation
    (17) 32 - Rear Derailleurs

    (18) 5 - Milling The Fork Crown
    (19) 19 - Tires And Tubes
    (20) 33 - Front Derailleurs

    (21) 6 - Sizing And Threading Fork Columns
    (22) 20 - Taper-Fit Crank Arms
    (23) 34 - Brake Levers

    (24) 7 - Seat-Tube Milling
    (25) 21 - Cottered Crank Arms
    (26) 35 - Brake-Cable Systems

    (27) 8 - Frame And Fork Alignment And Damage
    (28) 22 - One-Piece Cranks
    (29) 36 - Cable-Operated Rim Brakes

    (30) 9 - Adjustable-Cup Bottom Brackets
    (31) 23 - Chainrings
    (32) 37 - Hydraulic Rim Brakes And Disc Brakes

    (33) 10 - Cartridge Bearing Bottom Brackets
    (34) 24 - Pedal Removal, Replacement, And Installation
    (35) 38 - Suspension Forks And Rear Shocks

    (36) 11 - Headsets
    (37) 25 - Freehub Mechanisms And Thread-On Freewheels
    (38) 39 - Appendix

    (39) 12 - Adjustable-Cone Hubs
    (40) 26 - Chains
    (41) 40 - Worksheets

    ----------------------------------------------------------------------------
    ----

    "BantaE" <[email protected]> wrote in message news:[email protected]...
    > How many chapters are there?
    >
    > Eric
    >
    > > Tom DiMauro wrote:
    > >
    > > > Does anyone have the PDF files for the Barnett manuals?? I have
    downloaded
    > > > several chapters some time back from the specialized web site but
    would like
    > > > the complete set. I would appreciate any help.
    > > >
    > > > Thanks, .....................................
     
  5. Tom Dimauro

    Tom Dimauro Guest

    Sorry the last post did not format properly.

    Barnett's book has 40 Chapters.

    BARNETT'S MANUAL (4th Edition) TABLE OF CONTENTS:

    At the following site near the bottom of the page.

    http://www.bbinstitute.com/manual.htm
     
  6. Iguana Bwana

    Iguana Bwana Guest

    On 11 Feb 2003 10:40:31 -0800, [email protected] (BantaE) wrote:

    >How many chapters are there?
    >
    >Eric

    Chapters 1 through 34 inclusive, & 37 as an orphan. It's not the current (latest) version of
    Barnett's Manual, but it serves the purpose and is great value at that 'price'.

    Iguana Bwana "The propagandist's purpose is to make one set of people forget that certain other sets
    of people are human."
    - Aldous Huxley 1937
     
  7. Nino K.

    Nino K. Guest

    BantaE wrote in message <[email protected]>...
    >How many chapters are there?
    >
    >Eric
    >
    >> Tom DiMauro wrote:
    >>
    >> > Does anyone have the PDF files for the Barnett manuals?? I have
    downloaded
    >> > several chapters some time back from the specialized web site but would
    like
    >> > the complete set. I would appreciate any help.
    >> >
    >> > Thanks, .....................................

    There are 40 chapters. Go on http://rideitbent.net/ and pick up 35 chapters in there. Miss 5. Or buy
    complete book for 150 US$. Good luck!

    Nino K. ;-]

    http://www.pbase.com/kliponino
     
Loading...
Thread Status:
Not open for further replies.
Loading...