B
Benjamin Weiner
Guest
I have a set of Stronglight model 106 cranks - at least that's what I think. 144mm BCD, relief down
the crank arm and on the spider arms, "106" by the pedal eye, standard 22mm remover threads.
Do any of you gurus recall what BB these required? Looks like about 120mm spindle and ISO (smaller
than Shimano) taper to me. I will probably use these for a fixed gear, so that is my intended
chainline. Thanks.
the crank arm and on the spider arms, "106" by the pedal eye, standard 22mm remover threads.
Do any of you gurus recall what BB these required? Looks like about 120mm spindle and ISO (smaller
than Shimano) taper to me. I will probably use these for a fixed gear, so that is my intended
chainline. Thanks.