Campag Ultra Drive Crankset+Bottom Bracket

Discussion in 'Cycling Equipment' started by EasyDoesIt, May 18, 2007.

  1. EasyDoesIt

    EasyDoesIt New Member

    Joined:
    Apr 11, 2005
    Messages:
    88
    Likes Received:
    0
    Hi all

    I'm thinking of putting a new Campag Centaur Compact Ultra Drive Crankset on my bike, cos i can't get a compact 2006 Centaur crankset to replace the 53/39 one i have. I was wondering could anyone tell me what tools i need, i understand i need the UT-BB120 Bottom Bracket Tool for the bottom bracket cups but i was wondering do i really need the UT-BB110 UltraTorque Crankset Tool to fit the cranks on ?

    Thanks in advance
     
    Tags:


  2. EasyDoesIt

    EasyDoesIt New Member

    Joined:
    Apr 11, 2005
    Messages:
    88
    Likes Received:
    0
    Hmmmm

    I'll take it no one knows then :confused:
     
  3. xtrainer

    xtrainer New Member

    Joined:
    Nov 22, 2006
    Messages:
    23
    Likes Received:
    0
    Cups: You can use either the Campagnolo tool you mentioned or just a normal Shimano compatible tool. For example Pedros and Shimano make tools that are compatible to the Campa cups also.

    Cranks: Again, you can use the Campa tool or just a long enough hex key with the same size (10 mm). I was able to find a suitable key from a normal hardware store; the key can be attached to a torque wrench.
     
  4. EasyDoesIt

    EasyDoesIt New Member

    Joined:
    Apr 11, 2005
    Messages:
    88
    Likes Received:
    0
    Cool thanks very much that's all i wanted to know and it's saved me a few Euros as i only need to buy one Campag tool, thanks again.
     
Loading...
Loading...