Campy Brake Question

PeterF said:

Can I use a set of pre-2000 Campy shoes/pads on my 2004 Record calipers? I need new pads and before shelling out $35, I would like to use a set of the old shoes/pads that I have with almost 0 miles on them.

While the older pads won't fit in the 'contemporary', 2004 brake's holders/shoes because they are, AFAIK, slightly curved, you could certainly use both the pre-2000 holder-and-pad on your newer calipers ...

Heck, if you didn't care how it looked, you could mount some 70's vintage Nuovo Record (type) brake pads in the calipers.

PeterF said:

Can I use a set of pre-2000 Campy shoes/pads on my 2004 Record calipers? I need new pads and before shelling out $35, I would like to use a set of the old shoes/pads that I have with almost 0 miles on them.

Thank you.

The older so called '9s' brake blocks will not fit into the '10s' holders. If you have the whole. I you have the whole assembly, pad and holder, just bolt them on.

Peter@vecchios said:

The older so called '9s' brake blocks will not fit into the '10s' holders. If you have the whole. I you have the whole assembly, pad and holder, just bolt them on.

Thanks Guys, I had the holders and the blocks, and installed them last night. They seemed fine and I could even them toe them in to my liking. Will ride tomorrow, to test them but I suspect they will be fine. Thanks again.