J
Jim Hultman
Guest
My apologies for the long post: I've a few older race bikes with Dura Ace 7 speed cassette wheels &
derailleurs. A few more with 105, 600 & Ultegra 7. [I've avoided converting to Shimano STI shifters
because the long sideways shift motion of a Dura Ace 8 set I once tried gave my neck a pain.] I've
used bar-ends & downtube shifters all this time, ignorant of Campy Ergo's shorter throw & button
arrangement. I recently bought a Chris Chance with Chorus Ergo 8, and no neck pain. Now I'd like to
update my favorite Dura Ace 7 speed bikes by installing Campy Ergo 8 shifters. (I also have 105 &
600 wheels, & am interested in comments on those). From reading old rec.tech posts, I see that the
Ergo conversion will work ,as Shimano 7 speed & Campy 8 speed both have 5mm cog spacing, and as long
as I use a Campy rear derailleur. (Because the Campy rear derailleur has a different rate of
mechanical advantage to the Shimano, which moves 1.67mm for each 1mm of cable pull). Some of the
questions I've been chewing over: What is the 'rate of ma' for Campy rear derailleurs... Will any
Campy rear derailleur work; going back to Super Record... I know that Dura Ace had a different rate
of ma than other older Shimano; I wonder what this rate is, (Maybe I can still use my Dura Ace rear
derailleurs).... Are Sachs New Success Ergo 8 levers compatible with Shimano rear derailleurs for my
purpose...Are there any spacing differences between the various models of Shimano cassettes &
freewheels... Can I use Ergo with Shimano 6 speed freewheels... What chain to use with these
conversions? Sounds like I'm tied in a knot with questions, but this is all fun. I can experiment
with all my different components and report back to you, but I'll bet I'm the last one to the party
on this issue. The freedom to shift while standing is still a very cool novelty to me! I like my old
steel racebikes, and I have so many perfectly good 6 & 7 speed wheels with good cassettes &
freewheels that I'd like to keep using them. My goal is to upgrade my fleet to Ergo as cheaply as
possible (of course, being a cheapskate). Thanks for your comments, Jim Hultman Santa Barbara
derailleurs. A few more with 105, 600 & Ultegra 7. [I've avoided converting to Shimano STI shifters
because the long sideways shift motion of a Dura Ace 8 set I once tried gave my neck a pain.] I've
used bar-ends & downtube shifters all this time, ignorant of Campy Ergo's shorter throw & button
arrangement. I recently bought a Chris Chance with Chorus Ergo 8, and no neck pain. Now I'd like to
update my favorite Dura Ace 7 speed bikes by installing Campy Ergo 8 shifters. (I also have 105 &
600 wheels, & am interested in comments on those). From reading old rec.tech posts, I see that the
Ergo conversion will work ,as Shimano 7 speed & Campy 8 speed both have 5mm cog spacing, and as long
as I use a Campy rear derailleur. (Because the Campy rear derailleur has a different rate of
mechanical advantage to the Shimano, which moves 1.67mm for each 1mm of cable pull). Some of the
questions I've been chewing over: What is the 'rate of ma' for Campy rear derailleurs... Will any
Campy rear derailleur work; going back to Super Record... I know that Dura Ace had a different rate
of ma than other older Shimano; I wonder what this rate is, (Maybe I can still use my Dura Ace rear
derailleurs).... Are Sachs New Success Ergo 8 levers compatible with Shimano rear derailleurs for my
purpose...Are there any spacing differences between the various models of Shimano cassettes &
freewheels... Can I use Ergo with Shimano 6 speed freewheels... What chain to use with these
conversions? Sounds like I'm tied in a knot with questions, but this is all fun. I can experiment
with all my different components and report back to you, but I'll bet I'm the last one to the party
on this issue. The freedom to shift while standing is still a very cool novelty to me! I like my old
steel racebikes, and I have so many perfectly good 6 & 7 speed wheels with good cassettes &
freewheels that I'd like to keep using them. My goal is to upgrade my fleet to Ergo as cheaply as
possible (of course, being a cheapskate). Thanks for your comments, Jim Hultman Santa Barbara