K
Kenny
Guest
I have a fork with a 1" cracked carbon steerer. The crack was due to
over doing it with the stem clamp. The crack begins at the top of the
steerer and is cracked clean through, from the inner wall to the outer
wall and is about 2cm in length. This crack shows signs of lengthening
as there are fissures manifesting itself from the original 2cm crack
and extending downward another 12cm. My friend who works for a bicycle
manufacturer says it can be fixed. I'm a little skeptical as he is a
bicycle designer and not an engineer. So here I am seeking your expert
advice. Can it be done?
over doing it with the stem clamp. The crack begins at the top of the
steerer and is cracked clean through, from the inner wall to the outer
wall and is about 2cm in length. This crack shows signs of lengthening
as there are fissures manifesting itself from the original 2cm crack
and extending downward another 12cm. My friend who works for a bicycle
manufacturer says it can be fixed. I'm a little skeptical as he is a
bicycle designer and not an engineer. So here I am seeking your expert
advice. Can it be done?