Chainstay crack: Where to find another?



Status
Not open for further replies.
B

bikeshangrila

Guest
How ya Mtbers.

After nearly 5 years biking on roads and trails and streets with my 1997 18" DiamondBack Racing V
Link 3.1 full suspension 7005 butted polished aluminum frame, I discovered a_crack across the top of
the_chainstay on the left side where it is bolted to the tube near the bottom bracket.

It is still rideable, with squeaks. If you know of a source, other than DiamondBack that may have an
old 18" DBR frame that could part with its chainstay, please let me know, asap.

Otherwise, I will have to let DiamondBack warranty my 18" DBR'97 frame with a new frame that will
cost me more, because it needs disc brakes and wheels. My v brakes cannot be used on the new DB
frames that are equal or superior to my frame, such as the SL Super and XSLs.

Or I may have to just keep biking my fav old DBR'97 squeaks and all, unless you know of a way to
fill in the cracked aluminum to stop the squeaking. My summertime only, biking babe Rosaline Jo
doesn't like to hear the squeaks. See her riding in my photo albums below.

One suggestion is to weld; the other is to let the LBS warranty the frame.

Thank you for your other suggestions and help.

http://photos.yahoo.com/bikeshangrila1998

http://community.webtv.net/bikeshangrila/MountainBikeLinks
http://community.webtv.net/bikeshangrila/BikeShangrilaBike

http://community.webtv.net/bikeshangrila/doc

http://community.webtv.net/bikeshangrila/PeaceTShirt
 
Status
Not open for further replies.