A
Azqaz
Guest
I just got my first set of clipless pedals, egg beater SS 2003's, and was wondering if there were
any gotchas I should watch out for when installing them and the cleats. I did a test after I
initially installed the cleats on my new Lake 201 extremes by snapping the pedal onto the cleat and
then twisting the pedal off by hand. I thought the cleats were on tight, but they rotated about 10
degrees on the shoes before they began to unclip. Obviously what I thought was tight enough wasn't
by a long shot, so I thought I'd better ask around to make sure I didn't screw something up.
Thanks Bryan
any gotchas I should watch out for when installing them and the cleats. I did a test after I
initially installed the cleats on my new Lake 201 extremes by snapping the pedal onto the cleat and
then twisting the pedal off by hand. I thought the cleats were on tight, but they rotated about 10
degrees on the shoes before they began to unclip. Obviously what I thought was tight enough wasn't
by a long shot, so I thought I'd better ask around to make sure I didn't screw something up.
Thanks Bryan