I purchased a new Tarmac comp. It came with ultegra 11 speed. But the crank is FSA gossamer pro bb30 52/36 and brakes are axis 2.0. I know these are on the heavier side. I would like to upgrade them this winter. What should I be looking for. Also I find it hard to "spin" on hills this has made me good at standing up for them. However if I have anything over a quarter mile "hill" I would like to be seated some of it. This is a lot different than my trek Domane 4.0 I had. Should I try to gear for it or should I try to train for it? Cassette is 11-28
Cycling Equipment · Public discussion
Crank upgrade.
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 4 September 2014
- Last activity
- 5 September 2014
- Original author
- Josh7171
- Posts
- 2
- Discussion status
- Public discussion
- Total views
- 504
- Views / 30 days
- 0
- Topics
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
Mostly, train for it. I don't know your age, your fitness level, or your aspirations, but in general, even here in Colorado, 36/28 is pretty darned low. To use wider range cassette you'll likely need a GS (medium cage) rear derailleur, too.
You can also get 50-34 chainrings for your Gossamer crankset, which will give you just a little more low end. Or you can get the whole 6800 or 5800 (105) Shimano crankset, with 50/34 rings, for (slightly) lower gearing, lighter weight, and crisper front shifting. You'll also need a Shimano BB86 bottom bracket or a converter for your FSA BB30.
I see a 52/11 top gear as a bit of a leg breaker, unless your riding covers long downhills in excess of 40 mph. 40 is about where I spin out my 50/11.
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.