Daytona chainrings on carbon Centaur cranks

Discussion in 'Cycling Equipment' started by aygee, May 6, 2012.

  1. aygee

    aygee New Member

    Joined:
    May 6, 2012
    Messages:
    1
    Likes Received:
    0
    Can anyone tell me if my 52/39 rings on my Daytona cranks will fit a carbon centaur crank. Both cranks are 135mm pcd. I have the opportunity to buy the cranks cheap but if they don't fit then a waste of money
    Thanks
     
    Tags:


  2. alfeng

    alfeng Well-Known Member

    Joined:
    Jul 23, 2005
    Messages:
    6,723
    Likes Received:
    126
    Yes, they will fit.
     
  3. alfeng

    alfeng Well-Known Member

    Joined:
    Jul 23, 2005
    Messages:
    6,723
    Likes Received:
    126
    BTW. The "pin" on the large chainring which is designed to catch the chain if your derailleur over-shifts (to prevent the chain from being lodged between the chainring & the crankarm) will NOT be hidden if you are going from a 5-arm to a 4-arm crank, and vice-versa ...

    NOT a big deal, IMO ...

    When THAT mis-match occurs then 'I' orient the "pin" so that it is to the LEFT of the arm when the crankarm is viewed as being at 12 o'clock.
     
Loading...
Loading...