Hi, since i would more than likely bin the GT frame due to a crack at the seat stay.
I would like to move the entire Ultegra (10 Spd) groupset + shifters, brakes and wheels to a steel Saronni bike (circa mid 80s) that i just acquired.
Appreciate some advice on the parts that are a little confusing for me....
Crankset : Will my Ultegra fit if current bike is using a Shimano Sante set? Will the bottom bracket be the same? The Saronni has a british spec BB.
Derailleurs : Will I need a bracket/holder or something for the rear D?
Shifters : do i need to braze some line guide onto the steel frame for the Ultegra shifters? since the Saronni is still using tube shifters...?
Rear wheel : I tried putting in the rear wheel with 10spd set into the 126mm spec-ed 80's bike, and it fits with just little bit effort (don't think i want to permanently bend it to 130mm...), will this be ok?
Appreciate any thoughts. Thanks!!
I would like to move the entire Ultegra (10 Spd) groupset + shifters, brakes and wheels to a steel Saronni bike (circa mid 80s) that i just acquired.
Appreciate some advice on the parts that are a little confusing for me....
Crankset : Will my Ultegra fit if current bike is using a Shimano Sante set? Will the bottom bracket be the same? The Saronni has a british spec BB.
Derailleurs : Will I need a bracket/holder or something for the rear D?
Shifters : do i need to braze some line guide onto the steel frame for the Ultegra shifters? since the Saronni is still using tube shifters...?
Rear wheel : I tried putting in the rear wheel with 10spd set into the 126mm spec-ed 80's bike, and it fits with just little bit effort (don't think i want to permanently bend it to 130mm...), will this be ok?
Appreciate any thoughts. Thanks!!