After finding a thread describing the freehub removal, I'm trying to figure out how to completely disassemble a 7700 freehub. I've removed the rubber gasket that mates the hub to the axle body and can see the 30 or so small bearings, but just how does one get at the pawls/break down the freehub?
One of my freehubs (very low miles) gives me a faint 'metal on metal' feel during freewheel...and every other 'pawl' detent isn't a click...it is a distinctly different feel/sound. Would really like to get in there to see whassup. I put about 6 drops of light oil on the bearings/reassembled and the suspect feel is still present.
Appreciate the help!
~John
One of my freehubs (very low miles) gives me a faint 'metal on metal' feel during freewheel...and every other 'pawl' detent isn't a click...it is a distinctly different feel/sound. Would really like to get in there to see whassup. I put about 6 drops of light oil on the bearings/reassembled and the suspect feel is still present.
Appreciate the help!
~John