I've set up a bike with a B&M bottle dynamo and have a question about
tires. The bike currently has Panaracer Pasela TG's that I very much
like. However, they do not have a dynamo strip. Is that a big problem?
Is a dynamo strip only to prevent slippage, or is there some extra
rubber under it to counter wear from the roller? I have the dynamo
roller riding relatively high on the tire (against the rubber on the
tire, not the tan sidewall area) and have it very carefully aligned
perpendicular to the tire.
So if I use the B&M wire roller, would a dynamo strip be of any
advantage?
Also, it seems to me that the use of the wire roller would allow one
to use significantly less pressure against the wheel and still have
good grip (even in the wet), so that the wear might not be any more
with the wire roller than with a rubber roller (at higher pressure).
Any thoughts on this?
--Jim