ERD/Spoke Length for Velocity Fusion

Discussion in 'Cycling Equipment' started by Shawn Amir, Feb 3, 2005.

  1. Shawn Amir

    Shawn Amir Guest

    I have to order the spokes before I get my mitts on the rim... Spokecalc
    warns that the ERD is 596 and not the spec'ed 591--for 700c rims. Any
    experience with this?

    Building with DA 9sp (130mm hub 28h x2) I am getting 283.5 and 281.9 for
    spoke lengths. Should I just round up for DT spokes or add a mil or two.
    Plan is 14/15 for comps DS and 14/17 revo for NDS.

    Thanks for your help.
     
    Tags:


  2. Shawn-<< Spokecalc
    warns that the ERD is 596 >><BR><BR>
    << Building with DA 9sp (130mm hub 28h x2) I am getting 283.5 and 281.9 for
    spoke lengths. Should I just round up for DT spokes or add a mil or two.
    Plan is 14/15 for comps DS and 14/17 revo for NDS. >><BR><BR>

    Call the shop and ask. We have built many wheels with Fusion, they are 596mm
    ERD.

    As for the lacing, I would suggest 3 cross lacing and inside pulling. 3 cross
    for 28 hole rear and thin spokes on the NDS. Inside pulling to reduce
    spoke/flange overlap and bend for 28/3 cross.

    Peter Chisholm
    Vecchio's Bicicletteria
    1833 Pearl St.
    Boulder, CO, 80302
    (303)440-3535
    http://www.vecchios.com
    "Ruote convenzionali costruite eccezionalmente bene"
     
Loading...
Loading...