UK and Europe · Public discussion

fixed (almost) done.

Started by del · · Last activity · 5 posts · 238 views

Thread details

What we know about this thread

Original section
UK and Europe
Published
16 June 2006
Last activity
16 June 2006
Original author
del
Posts
5
Discussion status
Public discussion
Total views
238
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–5 of 5
Posts remain in their original chronological order.

Text size
  1. Yesterday I picked up the fixed/free rear from the LBS, stripped the
    bike of unnecessary items and built it back up. The new hub, a SystemX
    model, after a couple of short rides and lock ring tightening, still
    seems to allow the sprocket to come loose when I slacken or stop
    pedaling, still not used to always spin! Should I need to get a spacer
    for the hub or will it just need time to bed in?
    --
    del 8-)

  2. del said:

    Yesterday I picked up the fixed/free rear from the LBS, stripped the
    bike of unnecessary items and built it back up.

    Time for some kitchen pics?

    Quoted message said:

    The new hub, a SystemX
    model, after a couple of short rides and lock ring tightening, still
    seems to allow the sprocket to come loose when I slacken or stop
    pedaling, still not used to always spin! Should I need to get a spacer
    for the hub or will it just need time to bed in?

    I found that as your technique gets better, the problem goes away. That
    didn't stop me resorting to riding up a good steep slope while standing
    on the pedals to get the thing tight again.

    --

    JimP

    " " - John Cage

  3. Quoted message said:
    del said:

    Yesterday I picked up the fixed/free rear from the LBS, stripped the
    bike of unnecessary items and built it back up.

    Time for some kitchen pics?

    A bit later today. Don't expect too much though as it's just a cheap
    convervsion ATM.

    Quoted message said:
    Quoted message said:

    Should I need to get a
    spacer for the hub or will it just need time to bed in?

    I found that as your technique gets better, the problem goes away.
    That didn't stop me resorting to riding up a good steep slope while
    standing on the pedals to get the thing tight again.


    I'll have to go out again dammit. ;-)
    --
    del 8-)

  4. Quoted message said:

    Time for some kitchen pics?


    On their way now, kitchen and park. Before, during and after shots.
    <URL: http://www.cychike.pwp.blueyonder.co.uk/index.html>
    If you click the slideshow images for the full size, 1600x1200, the
    download is around one meg each.

    Function before aesthetics!
    --
    del 8-)

  5. del said:
    Quoted message said:

    Time for some kitchen pics?


    On their way now, kitchen and park. Before, during and after shots.
    <URL: http://www.cychike.pwp.blueyonder.co.uk/index.html>

    You need a Brompton for that kitchen! Nice bike. I've always thought
    Reynolds 501 was underrated. It makes a frame about half a pound heavier
    than 531, but I've seen far fewer 501 frames buckled at the top of the
    downtube.

    Quoted message said:


    Function before aesthetics!

    Absolutely! My Falcon fixie has rack, mudguards and panniers and a
    paintjob (or what's left of one) more than 30 years old, but it works well.

    --

    JimP

    " " - John Cage

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.