For more photos, information or to make an offer please email [email protected] or phone 02 4274 4884.
Information About The Course:
This trials course was custom designed by trials guru Zoli Borbasi of Volatile Visions for use at the annual Bicycling Australia Show.
It was used at two shows: at the Royal Exhibition Building Melbourne in 2006 and the Dome, Sydney Showgrounds in 2005. The course was very popular with riders and spectators, because it allows top riders to fully display their talent but lesser riders to take easier options. It is being sold because the show has been cancelled for 2007.
The course was used by riders on 20 and 26 inch trials bikes and unicycles. It consists of four towers of varying height, linked by eight beams, plus three 44 gallon drums, one additional tower and three rolls of carpet for indoor set up.
It’s made from heavy gauge steel, primed and painted. The course can be fully unloaded and assembled by two people in under an hour. It only requires 16 bolts The estimated total weight is about half a tonne. It can be transported on a large trailer or small truck. The two smaller towers will stack inside the two larger ones for transport.
Course details :
All towers have heavy duty steel grating on top for a non slip riding surface.
Tower 1 1,105 wide x 1,105 deep x 1800 high
Tower 2 1,105 wide x 1,105 deep x 1500 high
Tower 3 1,000 wide x 1,000 deep x 1,000 high
Tower 4 1,000 wide x 1,000 deep x 800 high
Extra box 1,000 x 2,000 x 750, no grating on top.
7 beams 100 x 100 square section x approx 2,000 long
1 beam 90 diameter round section x approx 2,000 long
3 rolls of carpet, approx 4,000 x 3,000 each.
Located at Pt Kembla NSW (80 km south of Sydney). Will deliver at negotiable cost to anywhere between Newcastle & Canberra NSW. Will Freight Anywhere in Australia.
Information About The Course:
This trials course was custom designed by trials guru Zoli Borbasi of Volatile Visions for use at the annual Bicycling Australia Show.
It was used at two shows: at the Royal Exhibition Building Melbourne in 2006 and the Dome, Sydney Showgrounds in 2005. The course was very popular with riders and spectators, because it allows top riders to fully display their talent but lesser riders to take easier options. It is being sold because the show has been cancelled for 2007.
The course was used by riders on 20 and 26 inch trials bikes and unicycles. It consists of four towers of varying height, linked by eight beams, plus three 44 gallon drums, one additional tower and three rolls of carpet for indoor set up.
It’s made from heavy gauge steel, primed and painted. The course can be fully unloaded and assembled by two people in under an hour. It only requires 16 bolts The estimated total weight is about half a tonne. It can be transported on a large trailer or small truck. The two smaller towers will stack inside the two larger ones for transport.
Course details :
All towers have heavy duty steel grating on top for a non slip riding surface.
Tower 1 1,105 wide x 1,105 deep x 1800 high
Tower 2 1,105 wide x 1,105 deep x 1500 high
Tower 3 1,000 wide x 1,000 deep x 1,000 high
Tower 4 1,000 wide x 1,000 deep x 800 high
Extra box 1,000 x 2,000 x 750, no grating on top.
7 beams 100 x 100 square section x approx 2,000 long
1 beam 90 diameter round section x approx 2,000 long
3 rolls of carpet, approx 4,000 x 3,000 each.
Located at Pt Kembla NSW (80 km south of Sydney). Will deliver at negotiable cost to anywhere between Newcastle & Canberra NSW. Will Freight Anywhere in Australia.
