"Michael Dart" <
[email protected]> skrev i meddelandet
news:[email protected]...
> If you can be bothered with it you can replace the seals yourself. The
kit costs about $2.50US and is easy to install. They even have a downloadable service video for it
here:
http://www.foxracingshox.com/mountainbike/html/movies.html
It is rather difficult. You need a huge vise with plates or some other protection so you don´t
scratch the shock. I attempted it and failed. Well, I quit as the shock would not open (in spite of
innertubes), and I was afraid that I would damage it.
> Also check to see if the mounting bolts are bent. This will but strain
on the shock and cause it to leak air.
I will have a look at them, thanks. I am quite happy with my Switchblade except for the rear shock.
Now, I have changed the inserts in the lower eyelets four times and it has got a leak. Titus is
making a new part that replaces the present set up, and should be much more durable. Speedgoat is
sending me some. However, I would prefer to buy the new shock in Europe, shorter shipping time and
less WAT, if it is a standard one. I checked Titus homepage and it seems there is a special valving
for the Racer-X. Does not tell about the Switchblade.
Apparently, the Tracers have the same weakness.
Per
http://user.tninet.se/~ipg289h/English.html