Thanks for the detail, but I'm confused on this application
as I don't have a braze on tube. Is it possible to use a
braze FD, coupled with this clamp adapter to get the right
size? I thought these adapters were just for broken tube
braze ons. Thanks
"P. Hardewig @fuse.net>" <pjwig<nospam> wrote in message
news:[email protected]...
> If you're inclined toward Shimano, it's part # SH-SM-AD15
> (1-3/8" adapter) This clamp allows braze-on FD use on 34.9
> mm tubing. Your LBS should be able to get this for you, if
> you're on good terms
with'em
> (sometimes they won't bother with such a "small" order).
>
http://www.glorycycles.com/framclamforf.html
>
http://www.excelsports.com/new.asp?page=8&major=1&minor=33&-
description=Front+Derailleur+Clamp+Adapter&vendorCode=SHIM
> or I also found it, although pricier at:
>
http://www.biketoolsetc.com/index.cgi?id=792469522710&c=Rep-
air%20Parts&sc=Derailleurs&tc=Front%20Mounts
>
> '03 Campy Record Triple FD also fits the bill w/o an
> adapter (69.99 @ Colorado Cyclist)
>
> Hope this helps!
>
> Wishing you flat hills, tailwinds & friendly dogs, Pat
> "Scott" <
[email protected]> wrote in message
news:XZqdnQCv4fahfcrdRVn-
>
[email protected]...
> > I'm replacing worn out RSX with Shimano 105 on my old
> > trek 1220. My
front
> > derailler requires a 34.9mm clamp. All I can find is
> > 21.8mm or 31.8mm. I noticed the clamp is removable on
> > the 105. Is there a larger
replacement
> > clamp available? If not, what would be a good
> > alternative?
> >
>