Cycling Equipment · Public discussion

Front SRAM shifter stuck in lowest chain ring

Started by Email address hidden · · Last activity · 4 posts · 472 views

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
27 June 2006
Last activity
28 June 2006
Original author
Email address hidden
Posts
4
Discussion status
Public discussion
Total views
472
Views / 30 days
0

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–4 of 4
Posts remain in their original chronological order.

Text size
  1. Was riding my Trek Navigator 100 tonight and a small piece of plastic
    fell out of the SRAM 3.0+ twist grip shifter for the front chain
    ring/derailer. I snapped it back in, but afterwards, instead of 3
    distinct shift points (for 3 front chain rings), it had about 6 stops.
    It was trial and error to find stops which didn't make the front
    derailer click against the chain, but at least all 3 forward rings
    would work. About 30 minutes later, the same piece fell out again.
    Although I snapped it in again, afterwards the shifter would not stay
    in any position but the first (lowest) front chain ring. Luckily, I was
    close to home.

    Q. -- Is there anything to do but replace the front shifter?

    Q. -- Will I have to buy two shifters (left and right)h to fix this?

    Q. -- Do I have to change out the derailer(s) as part of this?

  2. Replace just the front shifter, about US$25 or so

    Quoted message said:

    Was riding my Trek Navigator 100 tonight and a small piece of plastic
    fell out of the SRAM 3.0+ twist grip shifter for the front chain
    ring/derailer. I snapped it back in, but afterwards, instead of 3
    distinct shift points (for 3 front chain rings), it had about 6 stops.
    It was trial and error to find stops which didn't make the front
    derailer click against the chain, but at least all 3 forward rings
    would work. About 30 minutes later, the same piece fell out again.
    Although I snapped it in again, afterwards the shifter would not stay
    in any position but the first (lowest) front chain ring. Luckily, I was
    close to home.

    Q. -- Is there anything to do but replace the front shifter?

    Q. -- Will I have to buy two shifters (left and right)h to fix this?

    Q. -- Do I have to change out the derailer(s) as part of this?

  3. mike said:

    Replace just the front shifter, about US$25 or so

    Thanks for your answer.

    My questions were prompted by the concerns that (1) left and right
    shifters are only sold in pairs? (2) left shifter and front derailer
    are only sold in sets? You clearly answered that I can buy just the
    left shifter so I'll do that, but on looking around the 'net, I can't
    find a single vendor who sells just the left shifter. At least, there
    are no listings on froogle.google.com.

    Thanks again.

  4. "Gray" <[email hidden]> wrote in message
    news:[email hidden]...

    Quoted message said:
    mike said:

    Replace just the front shifter, about US$25 or so

    Thanks for your answer.

    My questions were prompted by the concerns that (1) left and right
    shifters are only sold in pairs? (2) left shifter and front derailer
    are only sold in sets? You clearly answered that I can buy just the
    left shifter so I'll do that, but on looking around the 'net, I can't
    find a single vendor who sells just the left shifter. At least, there
    are no listings on froogle.google.com.

    Thanks again.

    You're in luck - Nashbar has several front-only GripShifters on closeout
    right now, as low as $5.

    http://tinyurl.com/puuza

    They have both indexed and micro-indexed. I prefer the micro-indexed, (3 or
    4 clicks per chainring) so you can trim the front derailleur as you shift
    across the rear. YMMV.

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.