M
MJKALLAL
Guest
An older (pbly touring) Peugeot frameset- 'bought 2nd hand
Fifty-Nine.five cm C-C Top-Tube- the basis for calling it a "60cm"
Fifty-Eight.five cm C-C Seat-Tube, but lots of SPost left inside
Combination of both TIG and brazed joinery
Red w/ white logo. Condition of overall finish is Good
Neatly festooned with 9-10 Grateful Dead decals of various style
The innerds have been generously coated with Weigles' FrameSaver
Unicrown fork. F/R = Canti bosses/calipre drilling + Pannier/Fender eyelets
126mm R Spacing; D-Outs long enough for several gear combo's.
2 bottle cage mounts; cages are old-school Kingsberry; WHT/blk
Eng. BB Shell holding Shimano cartridge @ (?) 118mm L. sq. spindle
"Shimano 600" (FC-6207) CrankArms of 170mm L x 130mm BCD.
Steel (Sugino) DCovers; mirror polished
Ultegra 9spd 39t Rd C-Ring (spare Salsa 39t rd C-Ring incl.); 9spd chain
ACS 16t BMX free-cog; generic 14t fixed cog - both 3/32"
Look-style pedals; commuter 'platform-adaptors' included
Ultegra cartidge 1" threaded HSet. Quill-adaptor for threadless stem
Salsa "ProRoad" 42cm Bars. 130cm x -15o 'open face' AL stem
Rd&Wht checkerbed vinylized bar tape over rimstrip base layer
Shimano single-pivot aero-style BLevers- lightly scratched; no gouges
Generic canti brakeset; lots of life left in the pads
standard housing under bar tape, then liner with plastic bead covering
(ala Nokon housing- some of which is also installed).
Novel appearance, stopping-power seems unaffected.
Blk BMX Post holding-up the wolds' sweetest saddle:
Turbo "BIO," red and white stripped; kinda 'Rising Sun' pattern
Overall ExCond, considering its' age- 2 light scuffs; colors clear
CatEye 5-Bulb Red flasher mounted to SPost
F / R full fenders(blk plastic w/ metal mounts) incl.
You're on your own for a wheelset
Make a serious offer if interested.
If you're in a position to swap, I'm looking for
ExCond/NOS (pref) XTR 9spd r. der. and
ExCond/NOS (pref) XTR 9spd cogset- 12-32
Fifty-Nine.five cm C-C Top-Tube- the basis for calling it a "60cm"
Fifty-Eight.five cm C-C Seat-Tube, but lots of SPost left inside
Combination of both TIG and brazed joinery
Red w/ white logo. Condition of overall finish is Good
Neatly festooned with 9-10 Grateful Dead decals of various style
The innerds have been generously coated with Weigles' FrameSaver
Unicrown fork. F/R = Canti bosses/calipre drilling + Pannier/Fender eyelets
126mm R Spacing; D-Outs long enough for several gear combo's.
2 bottle cage mounts; cages are old-school Kingsberry; WHT/blk
Eng. BB Shell holding Shimano cartridge @ (?) 118mm L. sq. spindle
"Shimano 600" (FC-6207) CrankArms of 170mm L x 130mm BCD.
Steel (Sugino) DCovers; mirror polished
Ultegra 9spd 39t Rd C-Ring (spare Salsa 39t rd C-Ring incl.); 9spd chain
ACS 16t BMX free-cog; generic 14t fixed cog - both 3/32"
Look-style pedals; commuter 'platform-adaptors' included
Ultegra cartidge 1" threaded HSet. Quill-adaptor for threadless stem
Salsa "ProRoad" 42cm Bars. 130cm x -15o 'open face' AL stem
Rd&Wht checkerbed vinylized bar tape over rimstrip base layer
Shimano single-pivot aero-style BLevers- lightly scratched; no gouges
Generic canti brakeset; lots of life left in the pads
standard housing under bar tape, then liner with plastic bead covering
(ala Nokon housing- some of which is also installed).
Novel appearance, stopping-power seems unaffected.
Blk BMX Post holding-up the wolds' sweetest saddle:
Turbo "BIO," red and white stripped; kinda 'Rising Sun' pattern
Overall ExCond, considering its' age- 2 light scuffs; colors clear
CatEye 5-Bulb Red flasher mounted to SPost
F / R full fenders(blk plastic w/ metal mounts) incl.
You're on your own for a wheelset
Make a serious offer if interested.
If you're in a position to swap, I'm looking for
ExCond/NOS (pref) XTR 9spd r. der. and
ExCond/NOS (pref) XTR 9spd cogset- 12-32