Hi first post here!
So I bought an 80's apollo hybrid because bicycle theft round here is pretty bad and my last bike got stolen from the garage in the flats Iived at the time. So I bought this cheap old thing.
Anyway not being very knowledgeable on things at the time so correct if my jargon's wrong. I ended up having to replace the rear and front derailleur's and the bottom bracket of which the cup is epoxied to the frame
oh and a new chain. Any parts have been cheap so far and I haven't spent much. Oh I've used all shimano tourney stuff because it's cheap and that's what the frame is supposed to have on it according to it's decals
The problem I have now is when on my largest chain ring the crank arm rubs hard against the FB. It's adjusted properly and is square with the crank set. So I'm assuming the crank set isn't clearing the frame enough what should I do?
The chain ring is really worn but actually runs quit smooth! Do i need a new crank set?
So I bought an 80's apollo hybrid because bicycle theft round here is pretty bad and my last bike got stolen from the garage in the flats Iived at the time. So I bought this cheap old thing.
Anyway not being very knowledgeable on things at the time so correct if my jargon's wrong. I ended up having to replace the rear and front derailleur's and the bottom bracket of which the cup is epoxied to the frame
The problem I have now is when on my largest chain ring the crank arm rubs hard against the FB. It's adjusted properly and is square with the crank set. So I'm assuming the crank set isn't clearing the frame enough what should I do?
The chain ring is really worn but actually runs quit smooth! Do i need a new crank set?