Quoted message said:Perhaps review?
Done that. Since the whole thing has been taken apart, the problem
might be with the parts in front, Ratchet ring, Central pivot or so...
O. Simonsen
Cycling Equipment · Public discussion
Help with Ergo rebuilt
Thread details
What we know about this thread
- Original section
- Cycling Equipment
- Published
- 22 March 2005
- Last activity
- 24 March 2005
- Original author
- O. Simonsen
- Posts
- 3
- Discussion status
- Public discussion
- Total views
- 559
- Views / 30 days
- 0
- Topics
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
O. Simonsen said:
Quoted message said:
Perhaps review?
Done that. Since the whole thing has been taken apart, the problem
might be with the parts in front, Ratchet ring, Central pivot or so...O. Simonsen
Perhaps the front toothed bushing(EC-RE-062) was installed backwards?
the '10' needs to go forward. -
Hi all.
Thanks for the response.
It was the washer EC-RE057 that was put on the wrong way. Opposite the
notch there is a small cutout that is bended, and this part has to
face the spring carrier, not the index gear.
Now everything works fine......O. Simonsen
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.