B
Boyle M. Owl
Guest
I've got a Schwinn ~1985 Voyageur (touring) frame that I'd like to build
up. It's nice Columbus tubing, just has chipped paint.
I'd like to use a Nexus 8 speed internal hub or Sram equivalent for the
drivetrain.
Looking at the information for the hubs, they are 130 or 135mm
(depending on model) between locknuts. The spacing between the dropouts
on the frame is 120mm
Should I try to bend the stays to the correct width or should I forget
about it?
--
BMO
up. It's nice Columbus tubing, just has chipped paint.
I'd like to use a Nexus 8 speed internal hub or Sram equivalent for the
drivetrain.
Looking at the information for the hubs, they are 130 or 135mm
(depending on model) between locknuts. The spacing between the dropouts
on the frame is 120mm
Should I try to bend the stays to the correct width or should I forget
about it?
--
BMO