I've got a Cannondale v3000DH Active frame round which I've
built a downhill bike [my first one]. Problem is the rear
caliper mount: the swingarm's got an L shaped bolt-on
bracket onto which the caliper mounts. The bracket's got
48mm centres for the caliper so it won't take an IS mount
caliper. I've tried 2 Cannondale dealers to get the right
brakcet [they must exist??] but no joy. Has anyone else
succeeded on this frame or do I need to get a bracket
machined up?
Mountain Bikes · Public discussion
IS or not....
Thread details
What we know about this thread
- Original section
- Mountain Bikes
- Published
- 31 March 2004
- Last activity
- 1 April 2004
- Original author
- Matt
- Posts
- 2
- Discussion status
- Public discussion
- Total views
- 741
- Views / 30 days
- 0
The navigation and discussion metadata provide context. Posts remain in their original chronological order.
-
-
Matt said:
I've got a Cannondale v3000DH Active frame round which
I've built a downhill bike [my first one]. Problem is the
rear caliper mount: the swingarm's got an L shaped bolt-on
bracket onto which the caliper mounts. The bracket's got
48mm centres for the caliper so it won't take an IS mount
caliper. I've tried 2 Cannondale dealers to get the right
brakcet [they must exist??] but no joy. Has anyone else
succeeded on this frame or do I need to get a bracket
machined up?The only pre-IS standard I'm aware of is the old 22mm Direct
Mount system. But then again, C-dale has a bad habit of
doing their own thing, so you never know.Maybe try contacting your brake manufacturer to see if they
can help you.
--
Slacker
Active in the last 60 minutes
Active in this thread
0 users · 0 guests ·0 bots ·0 total
No signed-in users are active right now.
No known search crawlers active right now.