D
Donald Rory O`R
Guest
Low Priced Bike Parts
Maillard aluminum front quick release hub laced with 36 plated spokes to a 27 inch Rigida steel
wheel The chrome plating is not perfest but it is surprisingly good $10 plus $10 shipping
Shimano 36 spoke quick release aluminum front hub $5
Fuji gray frame fork and headset. 56 cm or 22 inch c to c seat tube 58 cm or 23 inch top tube $20
UPS shipping is $30 http://www.geocities.com/rory60/fuji_frame_1.JPG
SR Aluminum 170mm left crankarm that fits all older Jap, Korean and Taiwanese square tapered bottom
brackets.With retaining bolt. $7
Dia Compe center pull brake short reach. 54 to 70mm distance from the mounting bolt to the shoe
slot. complete with cables triangular cable mount and quick release fittings to mount on the seat
post bolt $5 one only Click Below for a picture:
http://bicycleparts.homestead.com/f...ompe_Brakes.JPG
Vetta Gel Flex mans black smooth cover saddle. It is 7 inches wide,10 inches long.Soft thick gel
foam over a flexible base.New Old Stock $5 Click below for a picture:
http://bicycleparts.homestead.com/f...dle_smaller.jpg
Brooks made in England plastic-vinyl saddle 10 1/4" by 6 1/2" unmarked $5 Click below for a picture:
http://bicycleparts.homestead.com/f...dle_smaller.jpg
SR Aluminum 26.8 seatpost with no integrated clamp $5 includes the separate steel sadddle clamp
Click below for a picture: http://bicycleparts.homestead.com/files/Saddle_post.JPG
Steel Mtn Bike silver seat post 9 3/4 inches long with a diameter of 7/8 of one inch 3$
Rear Deraillers
Shimano Skylark, RS and Eagle that are all short reach with non detachable under axle bolt mounting
tabs. $5 each Click below for a picture: http://bicycleparts.homestead.com/f..._deraillers.JPG
Fuji Maeda Ind Japan short open cage rear derailler that comes with a removable tab to mount under
the rear Axle nuts.if you remove the tab the derailler will mount on the tab on the frame $5
Shimano freehub spoke protectors one is for 36 spokes and 34 teeth, another is for 32 spokes and 32
teeth $2 each
Front Deraillers large offset inner plate in the cage.clamps to a 1 1/8 seatpost,bottom pull,. Made
in China $3
SR spirit that clamps to a 1 1/8 seatpost,bottom pull. It has a reverse action so that the shift
levers move the same way to shift up or down. Poor cosmetically $3
Front Forks $10 each $6 shipping
Early model made in Chicago Schwinn.Refinished in White.The steerer tube is 6 and 3/4" high threaded
to 5 and 5/8 inches high.The legs are thinner than most,they measure 25 mm wide near the top but
only 10 mm thick.Headset included. http://rory60.homestead.com/files/whiteschwinnfork.jpg
Standard one inch steerer blue with scratches.The steerer is 132 mm or 5 inches high, threaded to
100 mm or 3 and 7/8 inches.There are unthreaded fender eyelets. The legs are
25.5 mm or one inch wide near the top and 18 mm or 3/4 inch thick. there is a box crown with a
chrome plated cover.This will fit almost all small frames. Headset included.
http://rory60.homestead.com/files/bluefork.jpg
Huffy Mtn Bike one inch Forks $5 each complete with a full headset.one for 26 inch wheels is
red, the 24 inch wheel fork is black. these require brakes that mount on a single central hole
in the crown.
Black resin Mtn Bike brake front lever with orange inner and outer cables $3
front shfter that clamps on the handlebar with orange inner and outer cables $3
http://members.fortunecity.com/rory...range.cable.JPG
6 speed index shifters that clamp on the handlebar with black outer cables. A rear inner cable is
included $5 http://members.fortunecity.com/rory...vers.cables.JPG
130 mm bolt on 36 spoke rear hub with 36 spokes and nipples to lace up a 26 inch Mtn bike rim which
is not included $5
SR 52 tooth aluminum chainring to fit a 120 mm 5 hole bolt pattern originated by Stronglight for
their 99 and 100 cranks and also used by SR.This bolt pattern measures 70 mm from the center of one
of the 5 bolt holes to the center of the next bolt hole.If yours measures the same it will fit.This
pattern was used for both doubles and triples.A triple will mount 3 rings on the same bolt pattern
that permits a 28 tooth small chainring.It is nearly new with an aluminum overide ring to keep the
chain from overshifting the big ring and also to keep your pant cuff out of the chain. $3
Stems and Handlebars
SR aluminum Road Stem short 50 mm reach for handlebars with a one inch or
26.4 diameter the stem diameter is the english standard .222 It is longer than usual at 19 cm
Similar Nitto Youth 80 MM reach i6 cm length click below for a picture:
http://bicycleparts.homestead.com/f...short_reach.jpg
two steel 10 speed handlebars and steel stems. The chrome plating is still good. One bar is 13"wide
edge to edge 5"reach c to c and 5 1/2"drop c to c. The other is 16 1/2-5
27/2-5 3/4. Both stems have a reach of 2 1/4" and a stem diameter of about 20mm. Either bar and stem
is $15 plus $7 shipping. http://members.fortunecity.com/rory...peed.hdlbrs.JPG
Fuji Nitto Olympeade Steel 10 speed Handlebar 15 1/2"c to c 4 1/2" reach 6"drop. only a
lttle rust $5
Steel Mtn Bike handlebars,one is flat black with a 6 degree pullback,another is black 23"wide with a
6 degee pullback,the last is 23"wide gray with an 8 degree pullback. $5 each
http://members.fortunecity.com/rory....mtn.hdlbrs.JPG
Dia Compe center pull brake short reach. 54 to 70mm distance from the mounting bolt to the shoe
slot. complete with cables triangular cable mount and quick release fittings to mount on the seat
post bolt $5 one only Click Below for a picture:
http://bicycleparts.homestead.com/f...ompe_Brakes.JPG
priority mail is $3.50 additional on most items.Pay Pal OK.
Phone 732 566 2865 Aberdeen NJ Paypal name DonaldORourke Pay Pal from a credit card is 2.9% plus .30
cents more https://secure.paypal.com/affil/pal...40optonline.net
Maillard aluminum front quick release hub laced with 36 plated spokes to a 27 inch Rigida steel
wheel The chrome plating is not perfest but it is surprisingly good $10 plus $10 shipping
Shimano 36 spoke quick release aluminum front hub $5
Fuji gray frame fork and headset. 56 cm or 22 inch c to c seat tube 58 cm or 23 inch top tube $20
UPS shipping is $30 http://www.geocities.com/rory60/fuji_frame_1.JPG
SR Aluminum 170mm left crankarm that fits all older Jap, Korean and Taiwanese square tapered bottom
brackets.With retaining bolt. $7
Dia Compe center pull brake short reach. 54 to 70mm distance from the mounting bolt to the shoe
slot. complete with cables triangular cable mount and quick release fittings to mount on the seat
post bolt $5 one only Click Below for a picture:
http://bicycleparts.homestead.com/f...ompe_Brakes.JPG
Vetta Gel Flex mans black smooth cover saddle. It is 7 inches wide,10 inches long.Soft thick gel
foam over a flexible base.New Old Stock $5 Click below for a picture:
http://bicycleparts.homestead.com/f...dle_smaller.jpg
Brooks made in England plastic-vinyl saddle 10 1/4" by 6 1/2" unmarked $5 Click below for a picture:
http://bicycleparts.homestead.com/f...dle_smaller.jpg
SR Aluminum 26.8 seatpost with no integrated clamp $5 includes the separate steel sadddle clamp
Click below for a picture: http://bicycleparts.homestead.com/files/Saddle_post.JPG
Steel Mtn Bike silver seat post 9 3/4 inches long with a diameter of 7/8 of one inch 3$
Rear Deraillers
Shimano Skylark, RS and Eagle that are all short reach with non detachable under axle bolt mounting
tabs. $5 each Click below for a picture: http://bicycleparts.homestead.com/f..._deraillers.JPG
Fuji Maeda Ind Japan short open cage rear derailler that comes with a removable tab to mount under
the rear Axle nuts.if you remove the tab the derailler will mount on the tab on the frame $5
Shimano freehub spoke protectors one is for 36 spokes and 34 teeth, another is for 32 spokes and 32
teeth $2 each
Front Deraillers large offset inner plate in the cage.clamps to a 1 1/8 seatpost,bottom pull,. Made
in China $3
SR spirit that clamps to a 1 1/8 seatpost,bottom pull. It has a reverse action so that the shift
levers move the same way to shift up or down. Poor cosmetically $3
Front Forks $10 each $6 shipping
Early model made in Chicago Schwinn.Refinished in White.The steerer tube is 6 and 3/4" high threaded
to 5 and 5/8 inches high.The legs are thinner than most,they measure 25 mm wide near the top but
only 10 mm thick.Headset included. http://rory60.homestead.com/files/whiteschwinnfork.jpg
Standard one inch steerer blue with scratches.The steerer is 132 mm or 5 inches high, threaded to
100 mm or 3 and 7/8 inches.There are unthreaded fender eyelets. The legs are
25.5 mm or one inch wide near the top and 18 mm or 3/4 inch thick. there is a box crown with a
chrome plated cover.This will fit almost all small frames. Headset included.
http://rory60.homestead.com/files/bluefork.jpg
Huffy Mtn Bike one inch Forks $5 each complete with a full headset.one for 26 inch wheels is
red, the 24 inch wheel fork is black. these require brakes that mount on a single central hole
in the crown.
Black resin Mtn Bike brake front lever with orange inner and outer cables $3
front shfter that clamps on the handlebar with orange inner and outer cables $3
http://members.fortunecity.com/rory...range.cable.JPG
6 speed index shifters that clamp on the handlebar with black outer cables. A rear inner cable is
included $5 http://members.fortunecity.com/rory...vers.cables.JPG
130 mm bolt on 36 spoke rear hub with 36 spokes and nipples to lace up a 26 inch Mtn bike rim which
is not included $5
SR 52 tooth aluminum chainring to fit a 120 mm 5 hole bolt pattern originated by Stronglight for
their 99 and 100 cranks and also used by SR.This bolt pattern measures 70 mm from the center of one
of the 5 bolt holes to the center of the next bolt hole.If yours measures the same it will fit.This
pattern was used for both doubles and triples.A triple will mount 3 rings on the same bolt pattern
that permits a 28 tooth small chainring.It is nearly new with an aluminum overide ring to keep the
chain from overshifting the big ring and also to keep your pant cuff out of the chain. $3
Stems and Handlebars
SR aluminum Road Stem short 50 mm reach for handlebars with a one inch or
26.4 diameter the stem diameter is the english standard .222 It is longer than usual at 19 cm
Similar Nitto Youth 80 MM reach i6 cm length click below for a picture:
http://bicycleparts.homestead.com/f...short_reach.jpg
two steel 10 speed handlebars and steel stems. The chrome plating is still good. One bar is 13"wide
edge to edge 5"reach c to c and 5 1/2"drop c to c. The other is 16 1/2-5
27/2-5 3/4. Both stems have a reach of 2 1/4" and a stem diameter of about 20mm. Either bar and stem
is $15 plus $7 shipping. http://members.fortunecity.com/rory...peed.hdlbrs.JPG
Fuji Nitto Olympeade Steel 10 speed Handlebar 15 1/2"c to c 4 1/2" reach 6"drop. only a
lttle rust $5
Steel Mtn Bike handlebars,one is flat black with a 6 degree pullback,another is black 23"wide with a
6 degee pullback,the last is 23"wide gray with an 8 degree pullback. $5 each
http://members.fortunecity.com/rory....mtn.hdlbrs.JPG
Dia Compe center pull brake short reach. 54 to 70mm distance from the mounting bolt to the shoe
slot. complete with cables triangular cable mount and quick release fittings to mount on the seat
post bolt $5 one only Click Below for a picture:
http://bicycleparts.homestead.com/f...ompe_Brakes.JPG
priority mail is $3.50 additional on most items.Pay Pal OK.
Phone 732 566 2865 Aberdeen NJ Paypal name DonaldORourke Pay Pal from a credit card is 2.9% plus .30
cents more https://secure.paypal.com/affil/pal...40optonline.net