Cycling Equipment · Public discussion

Mavic cosmic elite rear bearings

Started by Phill P · · Last activity · 5 posts · 2,815 views

← Back to Cycling Equipment

Thread details

What we know about this thread

Original section
Cycling Equipment
Published
23 May 2009
Last activity
24 May 2009
Original author
Phill P
Posts
5
Discussion status
Public discussion
Total views
2,815
Views / 30 days
0
Topics
Wheel building

The navigation and discussion metadata provide context. Posts remain in their original chronological order.

Showing posts 1–5 of 5
Posts remain in their original chronological order.

Text size
  1. Original post
    Phill P
    Archived post
    #1

    I need to find out what bearings the rear mavic cosmic elite uses.

    Boca says 1x6001 & 1x6000. Now unless Mavic are building these wheels with TWO bushes in the rear 😉 and not using the same 3 bearings set as the kysrium elite etc (1x6001 & 2x608) then I don't know what is going on.

    Anybody have better hands on experience with these wheels?

    (no I don't have a set handy to pull apart and see for myself)

    If anybody knows where to go to find mavic service manuals or spares as well that would be handy!!

    Report
  2. Tech72
    Archived post
    #2

    See attached an expanded view of the Mavic Cosmic Elite hubset. Hope it helps.

    Report
  3. Phill P
    Archived post
    #3

    Thanks, that does help.

    One bearing in the rear which is the same as the two used in the front, so would support the 6001x2 frt 6001+6000 rr.

    Strange that they don't have a center bearing on the axle, bit like shimano.

    Where did you get that from?

    Report
  4. Tech72
    Archived post
    #4

    For all Mavic bits, see the following website:

    http://www.tech-mavic.com/tech-mavic/technical_manual/data/logon.php

    Login: mavic-com
    Password: dealer

    Disclaimer: This has been posted in the past by others so I'm no uncovering anything that isn't already public knowledge.

    Report
  5. Phill P
    Archived post
    #5

    Thanks, that is usefull but how do you determine the bearing sizes? It only says Mavic part numbers.
    It also doesn't say the bearing size for the free hub on any of those (only free hub part number).

    Is there some way to know the bearing sizes??

    Report

Keep exploring

Browse the sectionCycling Equipment Return to CyclingForumsStart at the home page Search discussionsFind another thread

Active in the last 60 minutes

Active in this thread

0 users · 0 guests ·0 bots ·0 total

No signed-in users are active right now.

No known search crawlers active right now.